0
What else can I help you with?
What are the components included in a 200 amp sub feed lug kit and how are they used in electrical installations?
A 200 amp sub feed lug kit typically includes lugs, mounting hardware, and a cover. Lugs are used to connect wires to the electrical panel, allowing for the distribution of power to various circuits. The mounting hardware secures the lugs in place within the panel, while the cover protects the components and ensures safety. These components are essential for safely and efficiently distributing power in electrical installations.
I have a Transformer 480 primary 208 secondary feeding 1 200amp mb 42 space panel I need to feed a subpanel 6 ft away I'm thinkin feed through lug at top of bus or at feed through MB suggestions?
The sub-panel need to be fed from the main panel, by way of a circuit breaker connected to one of the breaker locations. Or if your sub-panel has a main breaker installed you can feed from the main panel with a sub-feed lug kit. This looks like a breaker, but is only a point where you can branch off the sub panel.
How many people can a giant sub feed?
25
Can you feed a 60 amp sub panel from another 60 amp sub panel?
Yes, you can feed a 60 amp sub panel from another 60 amp sub panel as long as the total connected load does not exceed 60 amps. Make sure to properly size the wire and protect the circuits with appropriate breakers to ensure safe operation of the sub panel.
Can you tie the neutral wire on a sub feed to another panel to the main neutral lug?
No, the neutral wires from different panels should not be tied together at the main neutral lug. Each panel should have its own separate neutral connection to the main service panel to ensure proper grounding and to prevent potential hazards such as ground faults. Mixing neutral wiring from different panels can cause electrical imbalances and safety issues.
How do you hook up subs to your 2002 grand prix GTP with premium sound?
Start by installing a radio with decent sub preouts . 5v minium preferred. install your amp kit wiring and your sub. But get someone to build you a sub box that suits the sub your using. after market boxes are sub standard. you'll be glad you did.
How do you connect 200amp from main panel to sub panel to the lug of the min panel to lug of sub panel?
Not exactly sure what your question is and you need to make sure you are in compliance with electrical code for your jurisdiction. But, generally speaking you install a large breaker (let's say 100A 2 pole breaker to power the sub panel) just as you would install any other breaker in the presently used (hot) panel, and the proper sized cable then goes from old to new and terminates on the main lugs of the new panel. Ground and neutral are usually isolated from each other in the sub panel but depends on other factors as to location of the sub panel, etc.
Are Nissandatsun 300zx included in this scenerio?
Both Datsun & Nissan are listed under Cars & Vehicles, sub category Asian Cars, sub category, Datsun, Nissan.
How would you fit a sub to a standard MK6 fiesta stereo?
Hello, you need to get a Hi to Lo converter, and attach it to your rear speaker cables, that will then give you an AUX feed for the sub.
How do you wire floating neutral in sub panel?
You need to be more specific. Is this your feed?? Is this a home run (the wire that is feeding a circuit). Anyway if this is your feed wire (the wire supplying power to your sub panel) then you will land your two hots , then you will land your ground wire on the lug that is bonded to the panel. Sometimes this is a ground bar that can be screwed to the panel itself and then your neutral will go to the bar that is not touching anything. So your neutral coming in will be tightened down to the same bar as the neutrals that are feeding the circuits. This is assuming you'r are feeding your sub panel with 2 hots, a ground and a neutral.
What sub atomic particle does not particitpate in the calculation of mass of atom?
Mass of electron is not included for the calculation of mass of an atom.
How do you install a subwoofer?
In order to install a subwoofer you need: enclosure for sub, Amplifier, and an Amplifier kit. These three things can be found at an electronics store or online.
