0
What else can I help you with?
What is the amp rating for 10-2 wire?
The amp rating for 10-2 wire is typically around 30 amps.
What is the amp rating for 10/2 wire?
The amp rating for 10/2 wire is typically around 30 amps.
What is the amp rating of 14/2 Romex cable?
The amp rating of 14/2 Romex cable is typically 15 amps.
What best breaker rating for 1.5 hp air-con unit?
The breaker you use is determined by the size of the wire in the wall not by what is being connected to that circuit. If you have 14/2 wire then use a 15 amp breaker. If you have 12/2 wire then use a 20 amp breaker. The breaker protects the wiring not the item connected.
What gauge wire is required for 15 amp service?
14-2
Amp rating 14-2 wire?
You are talking of two different things here. The voltage rating of a wire is based on the insulation factor. Common wire voltages are 300, 600 and 1000 volts. Current rating of a wire is based on the diameter of the wire and measured in AWG. The electrical code states how much current can be legally applied to the wire. Answering your question, the 2 wire cable is probably 300 volt rated and your #14 size wire is rated at 15 amps. Code also states that conductors can only be loaded to 80% continuous load, so 15 x .8 = 12 amps.
What is the maximum amp rating for a device that is designed to handle a 10-2 amp rating?
The maximum amp rating for a device designed to handle a 10-2 amp rating is 10 amps.
Can you connect 12-2 wire to 14-2 wire together?
You cannot connect 12-2 wire and 14-2 wire together. This can be dangerous, and it will cause issues with the circuit.
Can I in theory have a 12-2 20 amp circuit powering something in a room but tie into that 12-2 with 14-2 to say run small things under the 80 percent rule off it?
If you tie a 14-2 cable into a 12-2 cable that is protected by a 20 amp breaker the 14-2 cable is not protected because its rating is only 15 amps. To comply to the code the added wire will have to be 12-2. Then the whole circuit will be protected by the 20 amp breaker whose wire size 12-2 is rated at 20 amps.
Can 14-2 wire be used for outlets?
Yes, 14-2 wire can be used for outlets in residential settings. The 14-2 wire consists of a black (hot), white (neutral), and bare copper (ground) conductor. It is suitable for circuits with a 15-amp breaker and can safely power standard outlets.
How do you choose the right fuse for the job?
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
Will a 14-2 gage wire work for a 240 volt 15 amp breaker?
No. You will need a 14/3 with Ground.
