0
What else can I help you with?
Duplex receptacle circuit given 15 amp breaker 225 amp load?
A 15 amp breaker is not sufficient for a 225 amp load. You would need a breaker that matches the load current, such as a 225 amp breaker. Using a 15 amp breaker for a 225 amp load would cause the breaker to trip immediately due to overcurrent.
What is the weight capacity of this plasma mount?
The PAC500 has a maximum recommended weight capacity of 200 pounds. You can use this plasma mount with television sets sizes from 32" - 71". Maximum weight capacity recommended by the manufacturer is 225 lbs.
Can you use 10-3 with 30 amp breakers at 90 foot to run a 225 amp max arc welder?
No, using 10-3 wire with 30 amp breakers is not suitable for running a 225 amp arc welder. The wire size and breaker amperage should be appropriately matched to the current requirements of the welder to ensure safety and prevent overheating of the wire. In this case, a larger wire size and breaker amperage would be needed to support the 225 amp maximum draw of the welder.
What is the name of the world's largest cargo plane?
In terms of maximum cargo carrying capacity, the Antonov AN-225 is the world's largest cargo plane. In terms of maximum volume, the Boeing 747 LCF Dreamlifter is the largest.
How much fuel does a antonov an 225 HOLD?
The maximum fuel capacity is 300 tonnes (about 410,000 litres), but it would rarely fly with full tanks since the fuel alone weighs about half of the maximum take-off weight of the aircraft.
Can two 225 amp panels be fed from a 400 amp breaker?
Yes, but they obviously cannot be simultaneously loaded their maximum loads because the 400-amp breaker will blow well before that. Similarly, you can have multiple 100-amp panels fed from a 200-Amp main breaker, knowing that you will NEVER have 100 amps running in all panels at the same time.
What is the biggest plane in the world called?
The biggest plane in the world is called the Antonov An-225 Mriya. It is a strategic airlift cargo aircraft designed in the Soviet Union in the 1980s. The An-225 is known for its massive size and cargo capacity.
How many amps on 3 phase 225 amp panelboard each phase?
In a three-phase 225 amp panelboard, each phase will carry 225 amps. This means that the total current flowing through the panelboard is distributed evenly across the three phases, allowing for a maximum of 225 amps on each phase at a time.
Is 60 amp breaker good for 225 stick welder?
The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.
How a chiller plant has nominal capacity of 885 kW while input electrical power is 225 kW?
That is because the 885kW capacity is its cooling capacity. This is the amount of heat it can take out at the evaporator. The 225kW is the power input to the compressor. This is used to define the Coefficient of Performance of the Chiller (COP), which is 885/225
What size breaker is needed for a Lincoln 225 AC welder?
A Lincoln 225 AC welder typically requires a 50 amp double-pole breaker. This ensures sufficient power supply and prevents overloading the circuit. It's important to consult the welder's manual or an electrician to verify the specific requirements for your setup.
What is the maximum speed dodge spirit 1991?
225 km/h, 140 mph.
