0
What else can I help you with?
What is the opposite of plug?
If you're referring to a plug like on the end of a cord for an electrical device, this would be Recepticle. Otherwise it is just UNPLUG
What is hot plug as far as electrical fitting is concerned?
"Hot plug" could be an energized plug, or plug-end with short to outside (where you would grip), or plug on device that has no 'on/off' switch.
What is the process for plug end replacement on a device?
To replace the plug end on a device, first unplug the device from the power source. Then, use a screwdriver to remove the screws holding the old plug in place. Next, disconnect the wires from the old plug and attach them to the new plug following the manufacturer's instructions. Finally, secure the new plug in place with the screws and plug the device back into the power source.
What is the maximum weight of an electrical portable appliance?
There is no weight restriction on electrical portable appliances. It is the manufacturer's design that governs the size of the equipment. If it is of a lighter weight than the competitions then it will most likely be the most popular of the two items.The definition of portable in the electrical trade is a device that has a flexible cord attached to it, that supplies the power to the device. On the end of the cord there is a cap (plug) that plugs into a receptacle outlet where the device is to be used.
What is an electric plug?
An electric cord with prungs at the end to pug into an electrical outlet
What color of spark is at the end of a spark plug?
You will see a white spark because a spark plug produces an electrical arc
A flexible cord connection is made directly to the load end terminals of a busway plug-in device. The maximum length of this cord to a tension take-up device is?
The maximum length of the flexible cord should be as specified by the manufacturer of the busway plug-in device and in accordance with the local electrical code regulations. It is important to ensure that the cord length does not exceed the guidelines provided to prevent issues such as voltage drop and overheating.
What is the maximum weight of an portable appliance?
There is no weight restriction on electrical portable appliances. It is the manufacturer's design that governs the size of the equipment. If it is of a lighter weight than the competitions then it will most likely be the most popular of the two items.The definition of portable in the electrical trade is a device that has a flexible cord attached to it, that supplies the power to the device. On the end of the cord there is a cap (plug) that plugs into a receptacle outlet where the device is to be used.
What is the procedures in making extension cord?
The procedure in making an extension cord involves wiring an electrical plug on one end of an electrical cable and wiring a socket onto the other end. Some extension cords have a polarized plug and a ground terminal.
What is the procedures in making an extension cord?
The procedure in making an extension cord involves wiring an electrical plug on one end of an electrical cable and wiring a socket onto the other end. Some extension cords have a polarized plug and a ground terminal.
Where is the block heater cord in a ford escape 2006?
you have to buy the plug-in cord (for the block heater) separately. Block heater is about $34.00 CDN and the cord is about $75.00 CDN. The cord has the regular end to plug into your electrical socket and the other end has a special plug end for the heater.
How can I make an extension cord?
To make an extension cord, you will need a length of electrical wire, a male plug, a female plug, and some electrical tape. First, cut the wire to your desired length. Strip the insulation off the ends of the wire and attach one end to the male plug and the other end to the female plug, following the manufacturer's instructions. Secure the connections with electrical tape. Test the extension cord to ensure it is working properly before using it.
