0
What else can I help you with?
What is the recommended technique for spraying bin primer on surfaces for optimal coverage and adhesion?
The recommended technique for spraying bin primer on surfaces for optimal coverage and adhesion is to apply thin, even coats in a back-and-forth motion, overlapping each pass slightly. This helps to ensure that the primer is evenly distributed and adheres well to the surface. It is also important to follow the manufacturer's instructions for drying times and recoat intervals to achieve the best results.
How much does it cost to recoat a pool?
cost to recoat a ,pool 20 by 40
Can you recoat polyurethane without sanding?
Yes, you can recoat polyurethane without sanding if you apply the new coat within a certain time frame, typically within 24 hours. This is known as the "recoat window" and allows the new coat to bond with the existing polyurethane without the need for sanding.
Can you recoat eggshell paint with eggshell paint?
You can, but don't need to use additional primer.
Can you paint over fresh painted engine since you did not like the color or do you need to remove all the paint again?
Check the instructions on the paint label to see if there is a maximum time that you can recoat the paint, however, you should be able to recoat the engine in a different color at anytime within a couple of weeks with no adhesion issues at all.
How long does it take for Kilz to dry after application?
Kilz typically takes about 30 minutes to dry to the touch and 1 hour to recoat.
If you recoat over black acrylic paint with another color will it cover it up?
Gesso over the black, then apply the new color layer.
What is the drying time of Kilz 2 primer?
The drying time of Kilz 2 primer is typically 30 minutes to touch and 1 hour to recoat.
Can you paint over Behr 300 waterproof?
Yes, you can recoat Behr 300 waterproofing wood protector with an oil-based or 100% acrylic paint after cleaning.
Can you paint over xim peel bond with an acrylic paint?
Yes, you can paint over XIM with any acrylic or alkyd paint. Read the instructions on the can for drying and recoat times.
Can I repaint or recoat my fibreglass in ground spa The finish is in poor condition but structurally sound.?
You should be able to give it a lite sanding (maybe steel wool) then apply a new gel coat
Painted table and finished with poly and now have many bubbles - what can I do now?
You can sand the work or scrub it with steel wool to remove the bubbles. Then recoat the finish being careful not to introduce more bubbles.
