If you strip a screw, you can try using a rubber band or a screw extractor tool to remove it. If those methods don't work, you may need to drill out the screw and replace it with a new one.
The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.
Take a hook like a command strip, screw it, tape it, or somehow atatch it to the ceiling, then peel tiny strip of the banana and screw the it through the hook
Yes, you can cross-thread or strip a screw when removing it. Cross-threading occurs when the screw is misaligned and forced into the hole, damaging the threads. Stripping happens when the screwdriver slips or the screw head is worn down, preventing proper grip. Both issues can make it difficult to remove the screw and may require special tools or techniques to resolve.
in the tank the is an access panel in the trunk area that you should be able to get to it from warning do not strip on snap the screw heads off you will have to drill and tap them out if you do
To use a washer and screw together effectively, place the washer on the screw before inserting the screw into the material. The washer helps distribute the pressure and prevents the screw from digging into the material. Tighten the screw until it is secure, but be careful not to overtighten as this can damage the material or strip the screw.
It depends on the type of material that the screw in made of. Also the threads in softer materials such as brass will 'strip' if over tightened.
You may have a worn screw tip or driver. Predrill your holes, use hand soap from a pump dispenser to help the screw go in easier. Make sure you have a # 2 bit if your screw is a #2...
To screw things together, first align the items that need to be joined. Insert the screw into the hole and turn it clockwise using a screwdriver or drill until it is securely fastened. Be careful not to overtighten and strip the screw or damage the items being attached.
To properly connect a white wire to a silver screw, strip the end of the wire, loop it around the screw in a clockwise direction, and tighten the screw securely using a screwdriver. Make sure the wire is securely attached and there are no loose strands.
A number 8 screw typically requires a size 8 screw.
You can demonstrate the similarity between an inclined plane and a screw by wrapping a strip of paper around the pencil (representing a screw) and cutting it in a helical shape using the scissors. As you unroll the paper strip, it will resemble an inclined plane, showing how both tools use the same principle of having a sloping surface to make work easier.
A posidrive screw stays centered over the driving tool. On Slotted head screws, the screwdriver can slip easily out of the groove. A very nice kind of screw is the "TORX" head screw. With the proper torx bit, they cannot slip or strip easily while screwing them into wood or metal.