0
What else can I help you with?
How do you remove a TV turntable from a cabinet?
Turntable RepairHow to remove your turntable from your console:If there are no obvious screws attaching the turntable unit to the furniture or cabinet you may need to remove the back piece of the cabinet which is usually a thinner price of ply-board. Upon removing the ply-board their should be some screws attaching the turn table from the inside that can be disconnected using an average philips head screw driver.
How do you change the dash lights on a 1995 explorer?
You first have to remove the piece of dash trim that is on the inside of the instrument area. Usually just a couple of screws. Remove this piece then you should be able to get to the screws that hold the instrument cluster on. It should be just one big piece. Pull the piece out gentle and undo enough of the connections so that you can change the bulb\bulbs. Oh yeah you might have to remove the out dash piece so that the inner piece will come out. It should just be attched by clips. Pull it and it should come undone. It will sound like it is breaking, but shouldnt. It snaps in and out. Hope this helps.
Why is WikiAnswers such a piece of?
That should be answered with another question, "Why are you gay?"
Where is the thermostat located on a supra?
there is a hose coming from the radiator there should be 2 screws and a round looking piece and the thermostat is right behind it
You are replacing a piece of mdf and do not have a air gun what size nails should you use?
If you are gluing as well, finish nails or small screws will do the job.
What is an easy clever Halloween costume?
attaching many smarties to a pair of sweat pants, for "smarty pants" or printing out a quarter the size of a piece of paper and attaching it to the back of a shirt, "quarterback"
Get A Good Screwdriver?
When you purchase a seven piece patio set, expect to put it together yourself. Many of the parts for the table and chairs come in pieces that you have to piece together with screws and bolts. You need to have a good set of screwdrivers in order to tighten the bolts, and you should have a few different sizes in case there are different size screws.
Should you eat a tomato after a chipmunk ate a piece?
Find another tomato to eat.
What is the piece call that screw the lamp shade on?
The piece that screws the lamp shade onto the lamp is called a finial. It is typically a decorative knob that screws onto the lamp's harp to secure the shade in place.
How do you replace headlights in 1986 C10 Silverado?
It should be fairly easy, from the front of the vehicle there should be some screws that hold in the plastic casing, I think they are the star wrench screws. You should be able to take off the plastic piece just around the headlight and blinker unless it is a dual headlight. Once the plastic piece is off the headlight has a thin metal rim around it that has scews in it as well. Remove those (careful that you are not turning the headlight adjusting screws) and the headlight should come out and then you just unplug it, plug the new one back in and put everything back together.
How do you access the tail lights and back up lights located on the rear door of a 1990 Lexus ls400 to replace the bulb?
To replace the upper light on the hatchback door, the plastic trim piece just snaps in place, once that is removed the light assembly snaps down to reveal the bulb. The stop lights on the body have the attaching screws covered by plastic plus, just pry them out and remove the screws and the assembly can be removed
What is a screws?
A screw is a simple machine used to hold things together. You can find screws in almost any piece of furniture such as chairs and tables.
