Bolt holes are always clearance holes to allow for easy assembly and prevent binding or misalignment when inserting the bolt.
It is used for lining up bolt holes on flanges. You hammer it in through the bolt holes and it lines the holes up. (Hopefully)
The bolt pattern for a 2011 Cadillac CTS is 5x120 mm. This means there are five bolt holes, and the distance between the centers of two opposing bolt holes is 120 mm. Additionally, the thread size for the lug nuts is typically M12 x 1.5. Always check your vehicle's specifications or the owner's manual for confirmation.
escape
3/8
6 lug holes
No, the spacing between the bolt holes is often different.
some birds, sometimes bees, and squirrels, sometimes field mice
Bolt holes were used in the trenchs to hide away from and bombs coming, the bolt hole werent so very big so it was a very cramped space.
It will not fit without an adapter. The 5 in that number refers to the quantity of bolt holes. The 139.7 refers to the distance between adjacent bolt holes in the pattern. In other words the distance between the upper most bolt hole and the lowest bolt hole in the pattern. Obviously, if the distance between the bolt holes is off by 25.7mm, this wheel will not fit. The only option is to purchase a bolt pattern adapter commonly referred to as wheel adapters, to change the bolt pattern of your vehicle.
The bolt pattern for a 2012 Chevy Malibu is 5x120mm. This means it has five bolt holes, and the distance between the centers of two opposite bolt holes is 120 millimeters. Additionally, the thread size for the lug nuts is typically M12x1.5.
The bolt pattern for a 2006 Honda CR-V is 5x114.3 mm. This means there are five bolt holes, and the diameter of the circle that goes through the center of the bolt holes is 114.3 mm. This specification is important for ensuring proper fitment of wheels.
can be, starter bolt holes,bellhousing holes.