Pipes rattle when water is turned off due to a phenomenon called water hammer. This happens when the sudden stop of water flow creates a pressure surge that causes the pipes to vibrate and make noise.
choir members in your pipes
Water pipes can vibrate when the water is turned off due to a phenomenon called water hammer. This occurs when the flow of water is suddenly stopped, causing a pressure surge that can create vibrations in the pipes.
Hammering pipes is the result of inertia when moving water causes the pipes to move when a valve is suddenly turned off. Use an anti-hammer device. You can purchase one at most home centers.
Pipes make noise when water is turned off due to a phenomenon called water hammer. This occurs when the flow of water is suddenly stopped, causing a pressure wave to travel through the pipes and create vibrations that result in noise.
Pipes make a knocking sound when the water is turned off due to a phenomenon called water hammer. This happens when the flow of water is suddenly stopped, causing a pressure wave to travel through the pipes and create the knocking noise.
If pipes are frozen no water can flow, so water meter shouldn't be registering anything. But if pipes are frozen it's a good idea to turn the water off at the inlet. That way you have a chance to discover and leaks and damages when the pipes thaw w/o getting the whole place flooded.
I believe it is due to the pressure build up within the pipes once the water is turned off. I know they sell a product that you place in one of your pipes that serves as a buffer to stop the rattling.
They have probably got air bubbles in them. It may be a worn out ballcock at a toilet.
Depending where the noise was coming from, but this question is most likely to be answered in this way. If you switched a valve off and the noise was coming before the valve in the pipes, that would indicate a burst pipe.
A common cause of pipe noise in a home is when the pipes vibrate or rattle inside the walls. When the home was built, the plumber is supposed to install strapping around the pipe where it enters the studs in the wall or travels through the floor to prevent this. If this strapping was not secured and has fallen off (or never there to begin with) this will cause the pipe to rattle or vibrate when the water is turned on or off and cause the noise you are hearing. I don't think it is cause for alarm, but it definitely is annoying. Repairing this problem could be simple if the noise can be pin pointed. A licensed plumber should be contacted regardless.
Fluctuations in city water pressure. Sometimes this is a bad toilet ballcock. Test by turning water off to one toilet at a time to see if it stops.
This is most likely to be water hammer. The most likely reason is because a pipe has not been held down properly with a pipe clamp. It normally happens when a toilet is filling up or when taps are switched off suddenly. Its due to the water pressure in the pipes that makes the water rebound in the pipes causing them to rattle and make a noise