The lights in your house may flicker due to loose connections, faulty wiring, or a high electrical load. These issues can cause fluctuations in the electrical current, leading to flickering lights even if the circuit breaker does not trip. It is important to have a qualified electrician inspect and address the problem to ensure safety and prevent potential hazards.
Bad ground.
To determine if the lights and outlets in a room are connected to the same circuit, you can check the circuit breaker panel. If the lights and outlets are on the same circuit, flipping the breaker for that circuit will turn off both the lights and outlets. If they are on separate circuits, turning off the breaker for the lights will only affect the lights, and the outlets will still have power.
Assuming there's nothing wrong with the light circuit itself, usually a large load on the same branch circuit (circuit breaker) will cause this. Is your refrigerator on the same circuit? When the compressor kicks on, it will drag down the voltage on the entire circuit. This is most easily noticed by flickering or dimming lights.
The microwave lights may flicker intermittently due to a loose connection, a faulty bulb, or a problem with the electrical circuit.
about 5 lights to a circuit breaker in the circuit
why do my lights flicker and interior lights flicker
In a well designed house the lights are not connected to the same circuit as an appliance. If by going out you are saying that a breaker trips, then your appliances and lights combined are exceeding the rating of the breaker. You either need to rewire and balance the loads better or plug high current appliances into different outlets on another breaker. If you are not tripping breakers, but lights are just dimming you have a bigger problem with inadequate current supplying your house.
It is possible if the circuit breaker has tripped or is faulty. The best way to check is by unplugging the air conditioner, and plugging in a table lamp. If the lamp lights up, then you know that the circuit breaker is working, if not then it is faulty.
Your lights may flicker because they power is really low. It is very common for them to flicker when there is a storm out.
The circuit breaker is self resetting. you may have a short in the wiring.
The circuit breakers in a panelboard feed separate circuits. The lights that stay on are on a different circuit than the ones that go off. To fine the circuit that feeds the lights that stay on, go to the panelboard and turn off the breakers one by one until the lights go out. This is the circuit that feeds that circuit of lights. Remember that lights and receptacles can be on the same circuit together.
Signs of a bad circuit breaker in a home electrical system include frequent tripping, a burning smell, visible damage or corrosion on the breaker, and flickering or dimming lights.