A high efficiency furnace main burner shuts off to prevent overheating and ensure safe operation.
A high efficiency furnace's main burner shuts off to maintain a consistent temperature in the home and prevent overheating.
A high efficiency furnace's main burner shuts off after ignition to maintain the desired temperature in the home and prevent overheating.
A high efficiency furnace main burner shuts off after initial ignition to maintain the desired temperature in the home and prevent overheating. This cycling on and off helps the furnace operate efficiently and safely.
You sould be able to see it either in the open or through a sight glass. If you have a continious pilot you just look at the burner where the furnace is open. Higher efficiency furnaces have an intermitent pilot that is only light when it is needed to light the main burner. And some do not have pilots at all and an ignightor lights the burner directly.
The furnace main burner shuts off after ignition to maintain a safe and consistent temperature within the heating system. This helps prevent overheating and ensures efficient operation of the furnace.
The furnace main burner may shut off intermittently due to issues with the thermostat, a dirty air filter, a malfunctioning flame sensor, or a problem with the gas supply. It is important to have a professional technician inspect and diagnose the issue to ensure safe and efficient operation of the furnace.
Call somebody, it could be several things. All of which are safety related.
Pilot gas is the very small flow/burner used to maintain an ignition flame in a gas appliance. Sometimes called a pilot light, or pilot flame, it's used to ignite the main burner.
Yes, some furnaces have a pilot light. The pilot light is a small flame that ignites the main burner when the furnace needs to heat the air. It functions by staying lit continuously to ignite the gas when the thermostat signals the furnace to start heating.
If your main gas valve is stuck in the closed position, it must be replaced. This condition is the reason your thermostat will not cause the main burners to light.
Pilot light would work but the main burner would not as the thermocouple proves that there is a pilot light to fire. The main gas valve would not open
one of the main purpose of refractories in the boiler furnace is to