0
After World War II, France wanted to make sure that a war with Germany would never happened again. To do so, France wanted to economically unite the countries, so it would basically make a war impossible to occur. France and Germany signed the Treaty of Paris, along with Italy, the Netherlands, Belgium, and Luxembourg who, too, wanted in on the deal, created the European Steel and Coal Community. In the beginning, it focused mainly on sharing the economics of steel and coal, hence the name. However, as time dragged on, the ESCC gained more and more political power. This organization would later become the European Union.
What else can I help you with?
What does rsj mean?
rolled steel joist or reinforced steel joint
What is cable joint?
A cable joint is where multiple cable join together! Here's an XLPE cable joint(for other types of cable theres an other type of joint example: for a steel cable for bridges theres an iron/steel joint):
How is knuckle joint manufactured?
A knuckle joint is usually 'cast' in a mold with liquid steel or aluminium.
What are examples of joint supply?
joint supply is when the production of one good also results in the production of another. an example of this would be steel and cars. if there is more production of steel, there can be a greater production of cars, as steel is used in the manufacturing of cars.
How can you separate the control arm from ball joint without the special puller?
Remove the carter pin in the castle nut, loosen the castle nut, hit the lower control arm/upper control arm where the ball joint intersects sharply with a ball peen or small sledge hammer that has either a "soft" face or "shot" in the face of the hammer. This type hammer reduces the chances of small pieces of steel becoming airborne projectiles. "WEAR SAFETY GOGGLES"! Pieces of steel breaking away can act like a bullet.
What are 3 processes to join steel?
the question is not clear, I am giving some solutions to join the steel, First is temporary joint,permanent joint. Ex: for temporary joint is fastening with the help of drilling,threading,bolts&nuts. For permanent joints welding,annealing etc.
What are some major resources of Pennsylvania state?
coal minerals and steel in Pittsburgh
Where do you i find reinforced steel in Mafia Wars?
Arrange A Cartel Sale in District 5 drops quite a bit
How do you control hot shortness?
The main reason of hot sortness is sulphur in steel. Therefore, answer of control of hot sortness is to control the sulphur in liquid steel before casting
What are the resources of steel?
Fe and C (Iron and carbon)
What are Resources are in Kentucky?
It might be steel, fish, and animals.
How do you replace a ball joint on a 1991 s10 blazer?
Raise this corner of the vehicle at the frame. Remove the wheel and support the lower control arm. Remove brake caliper and rotor. Unplug ABS sensor if so equipped. If T-10 (4WD) not S-10 (RWD): Remove CV axle nut at hub. Loosen upper ball joint nut. Separate upper ball joint from spindle using large hammer to knuckle or ball-joint fork. Remove upper ball joint nut, then push upper control arm up away from spindle. Loosen lower ball joint nut, then separate from spindle. Remove lower ball joint nut. If T-10: lower spindle and remove from vehicle. If S-10: raise lower control arm enough to give you working room. Use a drill or chisel or grinder to remove four rivets holding ball joint to control arm. Secure new joint to control arm using supplied hardened steel bolts and nuts and lock washers. Continue reassembly as reverse of disassembly. Align wheels, as the alignment is now incorrect.
