0
What else can I help you with?
What does it mean to put a ball in to ball?
I'm thinking you mean to put a ball into Baulk. In Billiards, it doesn't apply to snooker or pool, a cueball in the Baulk area must be played down the table, that is out of Baulk. Baulk is the area including the D that is between the line & the top cushion.
What does the term baulk-line mean in snooker?
The Baulk area is marked by a line drawn 29 inches from the bottom cushion. A semi circle with a radius of 11.5 inches centered on this line within Baulk forms the 'D' in which the cue ball must be placed when breaking off, or after the cue ball has been potted, or shot off the table. The position of three of the coloured balls, Green, Pink and Yellow are located along this line prior to the commencement of the game
What is a baulk end?
In cue sports, the baulk line is the line at the baulk end of the snooker table, upon which the green, yellow, and brown balls are placed.
What is a baulk colour?
A baulk colour is any of the coloured snooker balls usually spotted on the baulk line in snooker - the yellow, green, and brown balls.
What is the croquet starting line called?
The croquet start line is called a baulk line.
Why in snooker is it called the baulk line?
The baulk area has no significance in Snooker and is only used in the game of English Billiards; an object-ball within this area is considered to be "In-Baulk", and cannot be played at directly if the striker is "In-Hand".
What are the measurements of the markings on a 7ft x 4ft pool table?
To mark any pool table(as they vary by manufacturer in exact size,)first measure the width of the slate then half this measurement. This is the spot mark, (which should be the centre point between the middle pockets and the corner pockets in an imaginary cross between the pockets). IE if the table is 39" wide,then measure from the edge of the slate,19.5"up the table and place the spot mark 19.5" from the edge of the table where the measurements meet.This is the exact spot mark. The line (baulk line) is one fifth of the slates length from the edge of the cushion. IE if the slate is 75" long then a fifth of this is 15"...measure 15" up the table from the edge of the cushion,place a mark on both sides and draw your baulk line. centre of baulk line spot will be 19.5". Sounds more complicated than it is and its easy to do but harder to explain. This method works for any pool table size up to 8' as far as i know. Hope this helps.
What are the measurements of the markings on 7ft x 4ft pool table?
To mark any pool table(as they vary by manufacturer in exact size,)first measure the width of the slate then half this measurement. This is the spot mark, (which should be the centre point between the middle pockets and the corner pockets in an imaginary cross between the pockets). IE if the table is 39" wide,then measure from the edge of the slate,19.5"up the table and place the spot mark 19.5" from the edge of the table where the measurements meet.This is the exact spot mark. The line (baulk line) is one fifth of the slates length from the edge of the cushion. IE if the slate is 75" long then a fifth of this is 15"...measure 15" up the table from the edge of the cushion,place a mark on both sides and draw your baulk line. centre of baulk line spot will be 19.5". Sounds more complicated than it is and its easy to do but harder to explain. This method works for any pool table size up to 8' as far as i know. Hope this helps.
What is a balkline?
A balkline is another term for a baulk line - in cue sports, the line upon which the green, yellow and brown balls are initially placed.
How do you remove the rear seat cushion to replace the battery in a 2000 Buick Lesabre?
Reach down in the bite-line (where the seat cushion and the seat back meet). Pull up on the seat cushion until the cushion raises above the bottom of the seat back. Pull the seat cushion towards the front. There are two metal tabs that are hooked into the front of the seat cushion that holds it in place; unhook these by moving the cushion forward. To replace, reverse the procedure, but make sure the seatbelt recepticles are exposed before pushing the seat cushion down into the bite-line.
What is the purpose of a baulk ring?
A baulk ring is a synchronizer component used in manual transmissions to help match the speed of gears before engagement. It reduces gear clash and wear on the transmission components by allowing smoother shifting.
What is a ball in hand?
A ball in hand is a circumstance in the game of pool or billiards in which a fault by another player permits the competitor to take the cue ball in hand and place it behind the baulk line.
