You can, it depends what you expect in terms of finish quality. You must also consider that there is not much difference in price when it comes to spraying paint and clear coat then clear coat only you still have to sand paint buff the only difference is maybe one or two hours clear coat needs to be removed to apply new clear coat, clear coat also take a great amount of work after drying to achieve oem finish. The answer is yes however having gone that far might as well refresh it unless you just find the clear does not suit your vehicle but that is unlikely.
You could try sanding the clear coat off where it is pealing then re-coat with new seal coat, I am not sure just how well that would work. Of course the best thing would be to take it to a paint shop and have it professionally repainted. I can tell you from experience that if you do nothing the paint under the seal coat will deteriorate to primer and it will rust through that.
If you mean the average mechanics shop towels, yes they can scuff a fresh clear coat paint job. And to make things worse, if your rags were provided by a service you can get rags that have been at a machine shop and could have metal shavings stuck in them.
its hard to know without knowing what car its coming off of, or what color it is. but id say anywhere from 200 to 350 dollars.
If it's a fine or shallow scratch, you could try buffing it out with polishing compound, if it's deeper (can you catch your nail on it?) you would be better off taking it to a auto paint shop where they will do it for you for a small price.
Just take it to a paint shop and let them paint it.
A paint shop is a shop which sells paint, or the part of a factory where items are painted.
The only way I know of( which is how a body shop would do it) is this: Obtain a inexpensive paint gun and rent a small compressor. Mask off area. Scuff entire trunk with a scotch-brite pad. Wipe down area to be painted with a wax and grease remover. Spray a tack coat of clear urethane on it wait 20 minutes then spray a second heavier coat. Stand back and admire the shine. If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
Silicone fluids containing amines can be used on scratches and rubbed with a muslin cloth will render the original look without white marks.Silicones wet the surface effectively and give transparency to the surface which will reflect the blue surface undernaeth.
You can buy microwave paint(paint for the inside of the microwave at any good hardware store. You can also buy it online. Simply type microwave paint in your search engine and wala!
yes u can paint it yourself. just find instructions how to properly prepare it before you paint
Not if you take precautions. Wear gloves, work in a well-ventilated area and/or wear a mask, and clean up after yourself. Take the lead filings to a tire shop where they recycle lead wheel weights and give it to them. They'll get a good laugh, but you'll have done the right thing. Don't forget to paint or otherwise coat the toy afterwards to seal the lead in. There is clear coat if you don't want paint.
I don't see why not - just make sure it's a non-toxic paint. Try a craft shop.