there could be a chance you could but from what ive seen ...... you cant and eaither it will b too pawerful or its not compatible with the gun
.... That is why they are called GAS blowback guns. and since you even asked, i feel it important to tell you that they do not mean gasoline. they mean Green Gas, propane, or Co2
Only if you don't want it to fire. Actually it is best to store the gun without a C02 powerlett in it.
you screw the adapter into the gun, and then the co2 cartridge.
All guns leak a little bit when you put Co2 in the gun. its normal
As soon as you release the pressure on the C02 it will loose all it's gas and will then not be able to fire the gun anymore. You must put in a new C02 powerlett to charge the gun again. The old C02 powerlett can be trashed it can not be recharged.
Co2 (carbon dioxide) x
Carbon dioxide (CO2) is the gas often used to put out fires, especially in fire extinguishers.
You simply screw the CO2 into the back of the gun. Unless your CO2 should go elsewhere which is different to each gun.
most likely a valve oring in damaged.
It is possible.
without CO2 or paintballs, you just put the bolt forward. In most guns this is how you de-cock after a day of play, but if you have a regulator, it may store a single shot. If you fire without co2, the gun will not cycle or fire a paintball, it will only go into the barrel. If you fire with no paintballs and co2, you may damage your gun.
There are some pistols that are meant to use both (like the KJW Xcelerator) and some gas guns that can be modded to use CO2 (this usually requires reinforcement of all parts involved in the gas system and sometimes even the slide because of the higher power of CO2), but most gas guns can't handle it. I would recommend buying a gun that comes able to do both out of the box, because modding one is a pain, but it is nice to be able to use either one (use a gas mag at close range and switch to CO2 if you are shooting further).