What size cistern
what temp
No, gases expand more than solids when heated.
If the cistern is clean, 15 fluid ounces of 5.25% chlorine bleach (Clorox or Purex) will suffice. If the cistern water is turbid, increase the amount to 24 fluid ounces.
The amount a bearing will expand when heated depends on factors such as material composition and temperature. However, typically a bearing will expand around 0.0005 inches per inch of diameter for every 100°F increase in temperature.
it depends on how much it is heated for example when lightning is released it expands the air by thousands of degrees by heat of it.and there is a big banging sound known as thunder
Steel expands by approximately 0.0000065 per degree Fahrenheit, per inch per inch when heated. So for one foot of steel (12 inches), it would expand by about 0.093 inches when heated to 1000°F.
Toilet cistern can cost a lot since it is the most used water in the house. But there is some ways to reducing the amount of water your toilet is flushing. First fill a half gallon container with water, place the container in the tank of the toilet, lower it in to the water, replace the lid and then youÕre ready to flush.
The coefficient of _____ expansion. It depends what kind of expansion you are talking about.
For the most part, liquid water expands when heated, and so does pretty much every material. Water's volumetric expansion is a few hundred parts per million per degree Celsius. The interesting thing about water, though, is that if it's below 4°C it expands as it gets colder, i.e. it has a negative volumetric expansion coefficient.
1760 times
As much as it's allowed to. Remember: Any gas always expands to fill the container it's in, even without heating it.
5%
a lot