answersLogoWhite

0

Mining ventilation is a significant safety concern for many miners. Poor ventilation inside sub-surface mines causes exposure to harmful gases, heat, and dust, which can cause illness, injury, and death. The concentration of methane and other airborne contaminants underground can generally be controlled by dilution (ventilation), capture before entering the host air stream (methane drainage), or isolation (seals and stoppings). Rock dusts, including coal dust and silicon dust, can cause long-term lung problems including silicosis,asbestosis, and pneumoconiosis (also known as miners lung or black lung disease). A ventilation system is set up to force a stream of air through the working areas of the mine. The air circulation necessary for effective ventilation of a mine is generated by one or more large mine fans, usually located above ground. Air flows in one direction only, making circuits through the mine such that each main work area constantly receives a supply of fresh air. Watering down in coal mines also helps to keep dust levels down: by spraying the machine with water and filtering the dust-laden water with a scrubber fan, miners can successfully trap the dust. Gases in mines can poison the workers or displace the oxygen in the mine, causingasphyxiation. For this reason, the U.S. Mine Safety and Health Administration requires that groups of miners in the United States carry gas detection equipment that can detect common gases, such as CO, O2, H2S, CH4, as well as calculate % Lower Explosive Limit. Regulation requires that all production stop if there is a concentration of 1.4% of flammable gas present. Additionally, further regulation is being requested for more gas detection as newer technology such as Nanotechnology is introduced. Ignited methane gas is a common source of explosions in coal mines, which in turn can initiate more extensive coal dustexplosions. For this reason, rock dusts such as limestone dust are spread throughout coal mines to diminish the chances of coal dust explosions as well as to limit the extent of potential explosions, in a process known as rock dusting. Coal dust explosions can also begin independently of methane gas explosions. Frictional heat and sparks generated by mining equipment can ignite both methane gas and coal dust. For this reason, water is often used to cool rock-cutting sites. Miners utilize equipment strong enough to break through extremely hard layers of the Earth's crust. This equipment, combined with the closed work space in which underground miners work, can cause hearing loss. For example, a roof bolter (commonly used by mine roof bolter operators) can reach sound power levels of up to 115 dB. Combined with thereverberant effects of underground mines, a miner without proper hearing protection is at a high risk for hearing loss. By age 50, nearly 90% of U.S. coal miners have some hearing loss, compared to only 10% among workers not exposed to loud noises. Roof bolters are among the loudest machines, but auger miners, bulldozers, continuous mining machines, front end loaders, and shuttle cars and trucks are also among those machines most responsible for excessive noise in mine work. Since mining entails removing dirt and rock from its natural location, thereby creating large empty pits, rooms, and tunnels, cave-ins as well as ground and rock falls are a major concern within mines. Modern techniques for timbering and bracing walls and ceilings within sub-surface mines have reduced the number of fatalities due to cave-ins, but ground falls continue to represent up to 50% of mining fatalities. Even in cases where mine collapses are not instantly fatal, they can trap mine workers deep underground. Cases such as these often lead to high-profile rescue efforts, such as when 33 Chilean minerswere trapped deep underground for 69 days in 2010. High temperatures and humidity may result in heat-related illnesses, including heat stroke, which can be fatal. The presence of heavy equipment in confined spaces also poses a risk to miners. To improve the safety of mine workers, modern mines use automation and remote operation including, for example, such equipment as automated loaders and remotely operatedrockbreakers. However, despite modern improvements to safety practices, mining remains a dangerous occupation throughout the world.

User Avatar

Wiki User

9y ago

What else can I help you with?

Related Questions

What are the relevance of safety in mining?

Mining is one of the most dangerous occupations in the US. Unsafe acts can not only kill workers, but shut down the entire mining operation. Safety is an ongoing, everyday part of mining operations, including training of workers, safety equipment, and inspections. The Mining Safety and Health Administration or MSHA is one of the regulatory bodies that helps ensure that all mining sites are prioritizing the safety of all workers.


What is the health and safety regulations on mining?

The health and safety regulations on mining in the US are issued by the Mine Safety Health Administration (MSHA), and agency of the US Department of Labor..


What do mine safety inspectors do?

They look for hazards to the safety of miners, they review safety training, and investigate mining accidents. The conduct inspections of mining operations and determine if safety standards are being met.


What is the name of a coal mine safety officer?

A Mining Safety Officer


What are positive thing about mining at Alberta?

its safety


How does mining cause racism?

Mining does not cause racism. Racism may influence how mining is accomplished in terms of who does what, and how well safety procedures are implemented.


How many mining deaths in the US?

As of recent reports, mining deaths in the U.S. have significantly decreased over the years due to improved safety regulations and practices. In 2022, there were 27 fatalities in the mining industry, which includes both coal and non-coal mining sectors. While this number reflects ongoing safety challenges, it is a notable decline compared to previous decades. Continuous efforts are being made to enhance safety measures and reduce the risk of accidents in mining operations.


How could coal mining be improved?

by getting more safety equipment


Should mining be banned?

yes mining should be banned it is a dangerous occupation and many of the gases are explosive it has a lack of safety regulations.


What are the physical agents in the mining and quarrying industry?

The physical agents in the mining and quarrying industry include the guidelines to the health, safety and welfare at work.


If a mineral deposit is located deep within the earth what mining methods are used to mind the deposit?

For deep mineral deposits, underground mining methods such as shaft mining, drift mining, and slope mining are typically used. These methods involve creating shafts and tunnels to access the deposit, allowing miners to extract the minerals from underground. Specialized equipment and safety measures are employed in underground mining to ensure the safety of workers and the efficiency of mineral extraction.


This department operates the Bureau of Mines which conducts reports on mining techniques.?

The Bureau of Mines is under the jurisdiction of the Department of the Interior. It is responsible for promoting safety and environmental protection in the mining industry through research, reports, and information dissemination. The bureau conducts studies and reports on mining techniques to improve efficiency, safety, and sustainability in the mining sector.