0
Hi guys,
As per my knowledge, I have mentioned the meaning of BCY.
Bank Cubic Yards
Beller-Chang-Yacobi (protocol)
British Columbia and Yukon
Business Council for Youth
Beller Chang Yacobi
Bayside Catholic Youth
Brandywine Coatesville YMCA if your solutions ends here, then please thanks to examville.com as I have got this answer from it.
What else can I help you with?
What is a legend of the Khufu?
ebd idcd uvm vijvn kv,.fj jxjh hcuciusdchuh dhcvp8udjvui jgdydjcug hdcuicyh usdchsjkyc 8ydcis udyc8d7 icvuyhdcy yfgcsduhv igdcg7dyvh uc89dfuyhy8 cng7uydysdgyjhdcg scg87 uygghby bcy ybxvvxgh hcvh ycn xucyu uhv8puy cuhxjchguicuydgc
How do you Convert bank yards to cubic yards?
One Bank Cubic Yard (BCY) equals 27 cubic feet (3'x3'x3') of earth in situ. When excavated and loaded loosely into a truck, the original one BCY of material expands to approximately 1.25 Cubic Yards (CY). The conversion from BCY to CY is required to estimate the correct quantity and costs of materials to be handled or transported after excavation.
What is the swell factor for mining sand and gravel?
The swell factor of materials such as sand and gravel is a variable which is dependent upon the type and compaction of the undisturbed (bank run) material. Generally speaking swell for sand and gravel can range from 12% to 40%. The variability in swell is affected by moisture, clay and other mineral content. Clean, dry sand and gravel tends towards the 12% end with an average of around 17%. Swell increases to the right as the material tested becomes "dirtier". Bank cubic yard (BCY) is converted to loose cubic yard (LCY) by multiplying the BCY x swell factor + BCY. Swell of a given deposit can be approximated by the use of several calibrated buckets. Carefully excavate a volume of bank run material and place it directly into calibrated buckets of a known volume. (Note: a five gallon bucket in not a five gallon bucket, you need to actually calculate the volume.) Before moving the filled or partially filled buckets, measure the depth from the rim top to the average top of material and also weigh each bucket. Carefully record the numbers for each bucket. Next, carefully measure and calculate the volume of the hole from which the material was removed. The volume of material in the buckets (loose) will be larger than the volume removed from the hole (bank). The difference reflects the amount of swell for that particular deposit.
What should you do if a few days after filing for bankruptcy you remember you didn't include some additional income?
AnswerAmend the petition. There is a charge for this $20-$40 range I believe.You need to file a "Motion to Amend" and add the new creditors. Be sure and check local rules to see how they want the amendments prepared. Also, make sure you note that YOU have to send out the notifications of filing to the new creditors, most bcy courts will only send them out for the original petition.AnswerAmend the petition to include the new information. The attorney may charge you an additional fee, and there is an added court cost. Hopefully, the additional income will not create any problems, but ask your attorney because it will depend on your individual facts in your case.Well, you may charge another fee for that additional information you may want to includeand as well for additional cost for the court. Dependign on your attorney if how much he/she gonna charge for that.
