WMM mix is produced by Well controlled Pug Mill type plant and the WMM material is Designed product and purpose of WMM is to resist water to reach upper DBM or DGBM layer.
Gsb is how the element of material is bond.
WBM (Water Bound Macadam) and WMM (Wet Mix Macadam) are used for Road construction in Base course layer. WMM is a new technology. difference between WBM and WMM can be summarized as below:Stone aggregate used in WBM is larger in size compared to WMM. In case of WBM its size varies between 45 mm to 90 mm depending upon the grade while in case of WMM aggregate size varies between 4.75 mm to 20 mmIn case of WBM stone aggregate, screening material and binders are overlaid one after another respectively at the time of construction. But in case of WMM, aggregate and binding materials are premixed in a batching plant or concrete mixing machine and then brought to site for overlaying and rolling.Materials used in WBM are stone aggregate, screening material (Kankar or murrum or smaller stone aggregate for filling up the voids ) and/or binding material (stone dust or Quary dust of PI not less than 6). materials used in WMM are Stone aggregate and binders (Stone dust or Quary dust of PI not less than 6)Quantity of WBM is generally measured in Cubic Meter while quantity of WMM is measured in Square Meter.
The unit weight of Wet Mix Macadam (WMM) typically ranges between 2.2 to 2.4 g/cm3. It can vary depending on the mix design and materials used in the construction of the WMM layer. The unit weight is an important parameter in determining the compacted density and strength of the WMM layer.
WBM (Water Bound Macadam) and WMM (Wet Mix Macadam) are used for Road construction in Base course layer. WMM is a new technology. difference between WBM and WMM can be summarized as below:Stone aggregate used in WBM is larger in size compared to WMM. In case of WBM its size varies between 45 mm to 90 mm depending upon the grade while in case of WMM aggregate size varies between 4.75 mm to 20 mmIn case of WBM stone aggregate, screening material and binders are overlaid one after another respectively at the time of construction. But in case of WMM, aggregate and binding materials are premixed in a batching plant or concrete mixing machine and then brought to site for overlaying and rolling.Materials used in WBM are stone aggregate, screening material (Kankar or murrum or smaller stone aggregate for filling up the voids ) and/or binding material (stone dust or Quary dust of PI not less than 6). materials used in WMM are Stone aggregate and binders (Stone dust or Quary dust of PI not less than 6)Quantity of WBM is generally measured in Cubic Meter while quantity of WMM is measured in Square Meter.WMM HAS MANY ADVANTAGES OVER WBM CONSTRUCTION1. SUPERIOR GRADATION OF AGGREGATES2.FASTER RATE OF CONSTRUCTION3.HIGHER STANDARD OF DENSIFICATION4.LESS CONSUMPTION OF WATER5. STRICTER STANDARD OF QUALITY ACHIEVABLE
gsb
Yes. WMM stands for Windows Movie Maker.
GSB (Goud saraswat brahmins)
Amritha rao is a GSB(gowda saraswath brahmin
Mckenzie
The exact density of WMM (Wet Mix Macadam) can vary depending on factors such as aggregate size, moisture content, and specific composition. However, a typical range for the density of WMM is around 1.8 to 2.2 tonnes per cubic meter.
G.S.B Mack has written: 'Badminton' -- subject(s): Badminton (Game)
wet mix mecadam is a base layer of DBM bonding b/w WMM and DBM is too good and we can compact the WMM fully..........