7/8 of an inch
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
The primary difference between a long radius (LR) and a short radius (SR) 90-degree elbow lies in the curvature and the radius of the bend. A long radius elbow has a center-to-end distance that is greater, typically 1.5 times the pipe diameter, allowing for a smoother flow of fluid and reduced turbulence. In contrast, a short radius elbow has a tighter bend, with a center-to-end distance that is equal to the pipe diameter, which can lead to increased pressure drop and turbulence in the flow. These characteristics make long radius elbows more suitable for applications where minimizing flow resistance is critical.
10-90 usd
10-100 usd
i payed 300 for one about ten years at a gun show mine is about 90% i wouldn't take that for it now lol
90 - 120 bucks in nice shape.
Can't be answered without the serial number and overall condition.
90-150 dollars.depending on overall condition and a good bore.
Depends on what version, originality, and condition. Anywhere from $200-$2000 with the information we have at this point.
Elbow is a fitting used to change pipe direction, 45 degrees in this case, LR is referred as "long Radius" ( normally most pipes, unless you ask for SR, short radius). Butt weld refers to welding 2 ends from two separate fittings or pipe. Both ends are beveled (30 degrees is tapered from inside pipe diameter to outside pipe diameter on pipe/fitting connections)
No serial number provided.
168 kilometres taking this route:Take A-3210 towards CENCIERO from Elciego to LA RIOJA, where A-3210 becomes LR-211.Continue on LR-211 to LR-512, at where you cannot go any further. Turn left onto LR-512.Take LR-512 to where you cannot go any further on LR-512. Turn right onto N-232.Take N-232 to AP-68. Turn left onto the entrance ramp to AP-68, then stay right and go onto AP-68 NORTE.Take AP-68 NORTE to Bilbao.