If it will not lite at all, copper pilot line kinked,,, bad gas valve, if you have the button on pilot and depressed down all the way. Will light but not stay lite, bad thermocouple.
The pilot light is a small flame which stays on all the time (as in older water heaters for example). When the water temperature drops below the thermostat setting, the main heating gas is turned on and the pilot light ignites it. There are many other uses for pilot lights. To conserve gas, modern water heaters generate a spark to light the gas.
The pilot light is a small flame which stays on all the time (as in older water heaters for example). When the water temperature drops below the thermostat setting, the main heating gas is turned on and the pilot light ignites it. There are many other uses for pilot lights. To conserve gas, modern water heaters generate a spark to light the gas.
How do I light pilot light on furnace
Not all furnaces have pilot lights. Modern furnaces often use electronic ignition systems instead. Check your furnace's manual or contact a professional to determine if your furnace has a pilot light.
To turn on the pilot light on a gas appliance, locate the pilot light button or knob and turn it to the "pilot" position. Then, press and hold the button while using a long lighter to ignite the pilot light. Keep holding the button for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
When pilot light goes out, gas flows out of the pilot light nozzle. If out has continued for a long time, a gas cloud can develop around the furnace. When you go to light the pilot light, you'll ignite this gas cloud and make a big fire ball. If your basement is drafty, you might never get a huge cloud of gas hovering around your furnace. When you notice that your pilot light is out, you should shut off the gas to the furnace and allow any stray gas to dissipate before you turn the gas back on and light the pilot light. alliedallcityinc.com
To turn on a pilot light, locate the gas valve and pilot light knob on the appliance. Turn the gas valve to the "pilot" position and press down on the pilot light knob while using a lighter or match to ignite the pilot flame. Hold the knob down for a few seconds to allow the pilot light to stay lit, then release the knob.
Pilot light for what? There should be no pilot light on a heat pump. Is this another silly homework/exam question?
The pilot light goes out when the gas appliance is turned to the "on" position because the flow of gas is redirected from the pilot light to the main burner, causing the pilot light to extinguish.
The pilot light can go out due to a variety of reasons, such as a draft, a dirty or faulty pilot light assembly, or a lack of gas flow.
To start a pilot light on a gas appliance, you typically need to locate the pilot light button or knob on the appliance. Turn the knob to the pilot position and hold it down while you use a long lighter or match to ignite the pilot light. Keep holding the knob down for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.