The Importance of Roof Shingles

Answer 1

Shingles that are put on the roof of a home are a covering with overlapping slaps. These slabs are flat and usually rectangular. Just one single layer should make sure that no water is able to get into the home because of the overlapping design.

To apply them, you must start at the very bottom of the roof, and work your way up to the top. The edge at the bottom of each row goes over top of the previous line by covering roughly one third of that shingle. Each shingle is easily secured in place with a hammer and some nails. Some people may also use a nail gun to make the job go a lot faster. Others may even use a staple gun, but it is less recommended as staples may come back out. At the tip of the roof, there is a ridge where the two sides meet. At this ridge, there is normally a sheet of metal or plastic that covers the crack. On top of that, there are special shingles that are curved to be like a cap.

Shingles have been made of many different materials. The most common have been asbestos-cement, slate, ceramic, and wood. Wood and paper-based asphalt are becoming less common because they are prone to being hazardous towards fire. Wood was mostly used when buildings were made almost all of wood, and in the European countries. It is also less used because it rots away in time. Fiberglass asphalt shingles are taking over the lead role. They are used on a majority of roofing jobs in homes.

These asphalt shingles last longer when it is cold outside, but should be applied when it is hot out. The reason that are more durable in cold climate is because of thermal shock. This occurs when the temperature quickly changes by more than a few degrees. Shingles for the roof should be applied in the summer because the tiles need heat and sun so they can be sealed to the shingle below.

So, before you even start, you need to make sure to know exactly which kind of shingle you are buying.