you dont stop buy an another display
To stop the clock flashing on your Fiat Punto Mia, first, ensure the ignition is on. Then, press and hold the "SET" button until the display shows the time you want to set. Adjust the hours and minutes using the appropriate buttons, and once the time is set, press "SET" again to save it. This should stop the flashing and display the correct time.
press the end of the wiper stalk in
When the light on your controller is flashing every couple seconds it is an indicator that your batteries are low. To check the battery level you hit the guide button and it should display a small battery symbol in the top left corner. To stop the flashing just replace your batteries.
The joint star
The obvious answer is just to set the time. But if that's too complicated, or it happens too frequently, place a strip or two of black electrical tape over the display, and it will stop flashing. Of course, if you actually need to know the time, this could be a problem.
The light is flashing because there is a problem. The problem will need to be diagnosed and repaired to stop the flashing.
Vehicles approaching a school bus with its yellow lights flashing must stop.
A flashing red traffic light is used the same way as a stop sign. You treat a flashing red traffic light the same way you do as a stop sign. If the traffic light is "blacked-out", it's to be treated as an all-way stop. What I do when I come up to a flashing red traffic light, I look at the cross-traffic signals to see if they're also flashing red, or if they're flashing yellow to see if they stop or if they don't stop.
Nothing to worry at all. The areas which are flashing is Nkon's way of telling you that the bright or highlights (flashing areas) are over exposed. When that happens, you just need to hold down the Exposure compansation button on the camera and rotate the thumbwheel one stop. That will solve it....:)
A flashing red signal is same as a STOP sign. So prepare to stop.
because flashing green lights mean go and the green lights that are not flashing mean stop