1
You can drive in the bicycle lane when making a right turn or when it is necessary to avoid an obstacle in the road.
You must enter the lane 200 ft. before making the turn.
You must enter the lane 200 ft. before making the turn.
You must enter the lane 200 ft. before making the turn.
If a road does not have a bicycle lane, a bicyclist should ride their bicycle on the right side of the road, following the flow of traffic.
Any traffic already in the lane(s) of travel you're turning into will have the right of way.
When turning right from a road that has a bicycle lane, you should first check for any cyclists in the lane. Signal your intention to turn and slow down as you approach the intersection. Make sure to yield to bicycles and ensure the lane is clear before making your turn. It's important to turn carefully to avoid any potential collisions with cyclists.
If there is no bicycle lane available, a bicyclist should ride on the right side of the road, as close to the edge as is safe.
A bicycle lane is a part of a roadway designated for use by cyclists.
In areas without a bicycle lane, a bicyclist should ride on the right side of the road, staying as close to the edge as is safe.
no
Yes! The most common might be when a motor vehicle is entering or leaving the main travel lane to enter or exit the roadway. The usual placement of the bike lane along the right side of the travel lane makes that necessary.When a motorist is preparing to make a right turn and is required by law to move to the right-hand curb or edge of the roadway. On curb and gutter roadways, the bicycle lane is a part of the roadway. Bicycle lanes on paved shoulders are a different topic entirely, and won't be covered in this question.FS 316.151 - Required Position and Method of Turning at Intersections(1)The driver of a vehicle intending to turn at an intersection shall do so as follows:(a) Right turn - Both the approach for a right turn and a right turn shall be made as close as practicable to the right-hand curb or edge of the roadway.