0
What else can I help you with?
What is the purpose of the fast lane on a motorway?
The fast lane on a motorway is designed for vehicles that are traveling at higher speeds, typically for overtaking slower-moving traffic. It helps maintain the flow of traffic by allowing faster vehicles to pass without disrupting those in the slower lanes. However, it's important for drivers to use the fast lane responsibly and return to the slower lanes after overtaking to ensure safety and efficiency on the road.
What is the center turning lane of an undivided three-lane or five lane roadway used for?
Drivers from either direction may use the center lane for left turns.
When turning right from a four-lane highway to another four-lane highway you should?
When driving on a four lane highway or freeway you should use the right hand land or 'thru lane' except when passing. If the right hand lane is designated for slower traffic or for exiting traffic, you'd use the lane to the left of it.
How many flares are needed for truck emergency?
If on a roadway where traffic is flowing only in one direction, you should use at least three to the rear of the vehicle. If on a two-lane road, at least three in each direction.
What are motorway stud colours?
ok well you have got four colours of reflecting studs. Green, Red, White, Amber.Green are on the slip loads. Red are on hard shoulder. white between lanes and Amber at central reservation.White are easy to remember as they are like on normal roads.Red is an emergency colour. the hard shoulder is only used in an emergency.green is go. so to go somewhere off the motorway you would use the slip road.
What motorway would you use to go from london to cardiff?
M4
What term do the British use for freeway?
A Motorway is the nearest equivalent. A Motorway has to have six lanes (usually), a speed limit of 70mph, an empty lane on either side for cars that have to stop (called the "Hard Shoulder") and no flat junctions except at the start and finish. A "Dual Carriageway" is a road with four lanes and a speed limit of 60mph, usually with some flat junctions and no hard shoulder.
Where should the driver position the vehicle in the lane when turning?
When turning, the driver should position the vehicle in the appropriate lane based on the direction of the turn. For a right turn, the vehicle should be close to the right edge of the lane, ideally in the rightmost lane if available. For a left turn, the driver should move towards the center of the lane or the leftmost lane, ensuring they are clear of oncoming traffic. Always use turn signals to indicate intentions and check mirrors for pedestrians or cyclists.
Can you use the center turn lane to merge into traffic?
No, the center turn lane is meant for making left turns and should not be used for merging into traffic.
Do you use less petrol in motorway driving?
I should think that driving in cities would use less petrol per year because one mostly drives such shorter distances. Still, the speedier motorway driving has the engine turning over very much closer to its peak power rpm's - the autocar will see much better petrol efficiency near the peak power point, so one would use less petrol per mile on the motorway.
When going straight on in a one way street which lane should you use?
When driving straight on a one-way street, you should use the lane that is closest to the center of the road, typically the left lane, unless signage indicates otherwise. If there are multiple lanes, you can choose any lane that allows for straight movement, but staying in the rightmost lane can be preferable for easier merging or turning. Always follow local traffic laws and markings to ensure safe navigation.
Do you use a parking lane to initiate a right turn?
No, you do not initiate a right turn from a parking lane. Parking lanes are not intended to be used as traffic lanes. To initiate a right turn, you should be in the farthest right traffic lane.
