The standard became effective for applicable boats manufactured of mono-hull boats less than 20 feet in length, except sailboats, canoes, kayaks and inflatables.
The standard became effective for applicable boats manufactured after November 1, 1972. The standards originally required the following:
Capacity Plate information by boat type:
Boats powered by outboards: the maximum persons capacity in pounds and maximum weight capacity (persons, motor and gear) in pounds and maximum horsepower capacity.
Boats powered by inboards and stern drives: the maximum persons capacity in pounds and maximum weight capacity (persons and gear). (The Coast Guard Safe Powering Standard does not apply to inboards, stern drives, etc.)
Manually propelled boats: the maximum persons capacity in pounds and maximum weight capacity (persons and gear). Also, keep in mind the limits defined on capacity plates apply in good to moderate weather conditions. In rough
waters, keep the weight well below the limit. People represent a "live" load; moving about affects a boat quite differently than static loads like the engine or fuel tank. If your boat's capacity is fully used, or if the weather becomes rough, distribute the load evenly; keep the weight low, and avoid abrupt changes in distribution. Shift
human or other weight only after stopping or slowing.
As an example, if you have a 30 foot boat having a 10 foot beam, you can safely carry 20 average size adults (approximately 150 lbs each). Keep in mind that this formula is based upon having calm seas! You should always carry less weight and fewer people if you know you are in for rough weather.
A 20 ft long or less boat must have a capacity plate.
A 20 ft long or less boat must have a capacity plate.
the safe load carrying capacity
On the capacity plate
On the capacity plate
On the capacity plate
A boat capacity pate tells you the maximum number of people that can fit in the boat at any one time.
The capacity plate on a boat is typically located near the operator's station, often on the transom or inside the boat near the helm. This plate provides important information, including the maximum weight capacity and the maximum number of passengers the boat can safely carry. It's essential for ensuring safe operation and compliance with regulations. Always refer to this plate before taking the boat out.
What type of boat must have a capacity plate
why did the vietnamese persecute french missionaries
Normal conditions, which is to say, no violent storms or very high waves. Under adverse conditions, the safe carrying capacity of the boat is, of course, less.
A boat capacity plate displays crucial information about the vessel's maximum weight and passenger capacity. It typically includes the maximum number of people the boat can safely carry, as well as the total weight limit, which encompasses both passengers and gear. This plate ensures that operators adhere to safety regulations to prevent overloading, which can compromise the boat's stability and performance. Additionally, the plate may include other specifications like the boat's model and manufacturer information.