answersLogoWhite

0

When approaching a 4-way intersection with 2 stop signs, the rule is to yield the right of way to vehicles that arrive first. If two vehicles arrive at the same time, the vehicle on the right has the right of way. It is important to come to a complete stop at the stop sign before proceeding through the intersection.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

Why has 4way nasal spray been removed from counters?

I can no longer find 4way nasal spray in stores. Why?


When can you use 4way flashers?

EMERGENCY SITUATIONS> Very slow speeds and wide loads. Really meant for stalled vehicles. Check your state rules of the road as some differ and you might get a ticket if you drive with them on.


Should cars on a 4way stop for the school bus?

Yes


If a traffic light is out of order what do you do?

treat it like a 4way stopp


Why doesnt my turn signal not working on a navigator?

I CANT GET MY TURN SIGNAL OR 4WAY FLASHERS TO WORK ,FUELS ARE GOOD. I HAVE A 98 LINCOLN NAVIGATOR CANT GET THE TURN SIGNALS OR 4WAY FLASHERS TO WORK. FULSE OR GOOD


How do you control a lamp from three different positions?

we use 2-3way switch and 1-4way switch


Where is the flasher for the 4way hazards located on a 84 F-250?

In side the dash up under the steering wheel.


How do you wire a one light to be operated from 4 location?

you will need 2-3way switch and 2-4way switch


Why do headlights go on and off on a 1999 crown Victoria p71?

the 4way mutil.switch. Headlights. turn sig. wiper washer. I was not the lcm.


Where is the four way flasher located on a 1995 Pontiac Sunfire?

I have a 1996 Sunfire and the 4way flasher is located on the top of the steering column.


Where is the flasher relay on 2004 Oldsmobile alero?

the flasher relay is part of your 4way flasher button there should be a recall if its not working correctly


Where can you get oil pressure for a turbo on a 96 cavalier and is it possible to still pass emissions testing?

You have to unscrew the oil pressure sensor on the back of the engine. then screw in the 4-way adapter you should have in the hole where you unscrewed the oil pressure sensor, it should come with a plug in the 4way, screw the sensor into the 4way alone with the oil line for your turbo. If you do not have a 4way they sell adapters which are placed underneath the oil filter with a spot where you can screw on the oil line. And yes you should be able to pass an emissions test because a turbo actually atomizes the fuel to probuce lower emissions.