0
What else can I help you with?
What is meant ideal fluid by civil engineering?
Any fluid that has no resistance to shear stress and no compressibility is called "Ideal Fluid"
Is water an ideal fluid?
Ideal Fluid:An incompressible fluid that has no internal viscosity.
Difference between real and ideal fluid?
Ideal FluidsIn compressibleIt has zero viscosityNo resistance is encountered as the fluid movesReal FluidsCompressibleViscous in natureCertain amount of resistance is always offered by these fluids as they move
is uniform flow is ideal fluid?
Uniform flow is a characteristic of ideal fluid behavior, where the fluid moves in a steady and consistent manner without any disturbances or variations in flow velocity or pressure. Ideal fluid assumes that the flow is frictionless, incompressible, and irrotational, which allows for the simplification of fluid dynamics equations. However, in reality, ideal fluids do not exist, and all real fluids exhibit some level of viscosity and other non-ideal behaviors.
Why does an ideal fluid move faster through a pipe with decreasing diameter?
The pressure within the fluid decreases
What is meant by an ideal plastic fluid how it is diff from plastic fluid?
there are newtonian fluids and non newtonian fluids both of these belongs to real fluid which posses viscosity .newtonian fluids r those fluids which obey the newtons law of viscosity while the later doesnt.there r various types of non newtonian fluids like simple non newtonian fluid ,real plastic fluid and ideal plastic fluid an ideal plastic fluid has shear stress which is more than the yield value but after that it obeys the newtonian law of viscosity.
What fluid is ideal replacement fluid for CSF if CSF is draining outside the body?
Normal saline (0.9% NaCl) is an ideal replacement fluid for CSF if it is draining outside the body, as it closely resembles the electrolyte composition of CSF. It helps maintain fluid balance and prevents electrolyte disturbances. It is important to consult with a healthcare provider for proper management in this situation.
What is the similarity of ideal fluid and real fluid?
There is, of course, s similarity between the set-ion of a boundary layer and a ... the proeess itself. Thus these rotational motions of an ideal fluidpossess a reel significance ... presents a reel difficulty and indeed no real simplification has been
What does Bernoulli's Principle say about pressure exerted by a moving fluid?
A simplified answer is: when the speed of an ideal fluid increase the pressure decrease.The principle of Daniel Bernoulli is old from 1738 !
What are similarities between bernoulli's principle and pascal's law?
Bernoulli's Principle uses Pascal's Law to relate the final and initial states of an ideal liquid. Pascal's Law says that a change in pressure at any point in an enclosed fluid at rest is transmitted undiminished to all points in the fluid, meaning that for an ideal fluid (Δρ = 0): ΔP = ρgΔh where ρ is fluid density, g is gravitational pull and h is height pf fluid above measurement. Bernoulli's Principle states that for an ideal fluid, an increase in the speed of the fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy: 0.5ρv2 +ρgh + P = constant Where v = velocity of the fluid. If the fluid is stationary, v = 0. Taking the derivative of this: Δ(ρgh) + ΔP = 0 Again, assuming ideality, ρgΔh + ΔP = 0 If we raise the fluid, the pressure will drop, meaning that we can rearrange the equation to: ΔP = ρgΔh
How does the thermal efficiency of an ideal Otto Cycle change with the compression ratio of the engine and the specific heat ratio of the working fluid?
The answer is 38.
Car ideal codition either direction is very hard steering and noice is coming?
Sounds like you need to add some power steering fluid.
