0
What else can I help you with?
Ford Expedition Eddie Bauer stereo questions?
i have a 1999 ford expedition. my subwoofer and amplifer are good but no sound what can i do to fix this
What does an amplifier do for a subwoofer?
An amplifier will power your subwoofer so they can work.
What is TDA 2002 ic?
ic tda 2002 is an audio power amplifer
Will a 600 watt amplifer power a 1300 watt speaker.?
Yes, but not to full effect.
What size of an amp should you get for a subwoofer in your 03 Jeep Liberty?
It depends on the power rating of the subwoofer.
Why is subwoofer cutting out?
It seems like you're using a passive subwoofer. A passive subwoofer doesn't have a power source (an amplifier.) You will need an amplifier for your subwoofer. Let a professional set it up for you.
Will I be able to lower the subwoofer separately on these computer speakers or is all the power run through the subwoofer.?
Most computer speakers with subwoofer have the power going directly to it, so it is needed to get an extension for all the other speakers.
What does non-enclosed subwoofer mean?
This means that the subwoofer has a port, which means the sub will be louder and require less power.
Can you use a 600 watt amp with a 500 watt subwoffer?
Yes, you can use a 600 watt amplifier with a 500 watt subwoofer. It is important to ensure that the amplifier's output power does not exceed the subwoofer's power handling capability to avoid damaging the subwoofer. It is also recommended to properly set the gain levels on the amplifier to match the subwoofer's power handling.
Is a 800 watt power amplifier can power a 1300 watt subwoofer?
yes/no
Can you replace your 10W subwoofer with a 30W subwoofer?
Yes, if it's a passive subwoofer, you might need to replace the amplifier for a new one as well. Too much or weak power outage is no good.
Will a 1600 watt amp blow a 450 watt sub woofer?
Well, it depends. When you look at subwoofers, it will say RMS and peak. Now, let's talk about the "RMS" and "peak" on the subwoofer. The RMS is the real power. That's what were gonna be looking for. The RMS is the continuous power design for the subwoofer to operate. The peak is the maximum power the subwoofer can handle. Obviously, were not gonna be running the subwoofer with its peak power because that will decrease the life of your subwoofer. Running too much power or too little can damage your subwoofer. It's also important to run it by it's RMS rating. So, I don't know if that 450 watt is the RMS or peak. I'm assuming that it's the RMS. As long as you don't bridge it, it should be fine.
