answersLogoWhite

0

What else can I help you with?

Related Questions

What is the clearance in air required for 150 kv bil.?

Phase to phase clearance should be around 11.5 inches.


Is there a required distants around a electrical disconnect box?

Yes, it is 36" clearance in front of the box and 30" clearance on either side of a service panel or disconnect.


How much clearance is need around 18000 volts to keep it from jumping to ground?

18000 volts clearance


What will the radial clearance be when the diametrical clearance cannot be measured?

If the diametrical clearance cannot be measured directly, the radial clearance can be calculated using the formula: Radial Clearance = (Diameter of the larger part - Diameter of the smaller part) / 2 This formula assumes that the parts are concentric and that the radial clearance is uniform around the circumference.


how can I get a top secret clearance job?

By asking around and getting applications for top secret clearance jobs. If someone likes your application and offers you a job then you got a top secret clearance job.


Why is there a housekeeping department in a hotel?

A housekeeping department is required for keeping an establishment clean. They are responsible for housekeeping staff who perform a variety of duties including turning around hotel bedrooms ensuring that they are clean, tidy and have fresh linen for the next customer.


Where to download halo?

It can be downloaded off the xbox its self, it costs around £40 in the uk and can be purchased and downloaded directly to the xbox 360 console. *Internet connection required


Where in Australia is the worst vegetation clearance found?

Around the southeast area.


How much harizontal and vertical line clearance is required in 33kv and 11kvphase to phase and phase to ground?

The minimum separation for a voltage of 34.5kV and conductor spans of 50 meters or less is 600 mm. The vertical clearance is 6.7 meters . For countries that never changed to the metric system 50 meters is about 150 feet and 600 mm is about 24 inches, 6.7 meters is about 22 feet. The minimum separation for a voltage of 15 kV and conductor spans of 50 meters or less is 400 mm. The vertical clearance is 6.1 meters.


What is the minimum connection time required for transferring from an international flight to a domestic flight at Washington Dulles International Airport (IAD)?

The minimum connection time required for transferring from an international flight to a domestic flight at Washington Dulles International Airport (IAD) is typically around 60-90 minutes. It is important to check with your airline for specific requirements and recommendations.


What is the clearance of the oil pump for a Chevy 350 engine?

we measured pickup-to-oil-pan clearance with a lump of Playdough. Shoot for around 3/8 to ½ inch


What is the clearance required in a stairwell?

The required clearance in a stairwell typically depends on local building codes, but general guidelines suggest a minimum headroom of 6 feet 8 inches (about 2.03 meters) to ensure safe passage. Additionally, stair width should accommodate at least two people passing side by side, often around 36 inches (91 cm) or more. It's essential to consult local regulations for specific requirements, as they can vary by jurisdiction.