screwdriver
The sound of a hammer hitting a nail is typically spelled as "clang" or "thud."
Yes, "nail" is a common noun. It is a general term used to refer to the small, thin piece of metal used to fasten objects together or to hammer into something.
It depends on whether they DID hit the nail on the head or not! If they got it right, spot on, then you say "yes, you did," but if they didn't, you say "no, that wasn't right."
That is an analogy from carpentry. To miss the nail and strike the wood will damage the wood. Hitting the nail off-center may cause the nail to shoot off and fly through the air. When you come up with a perfect solution to a problem it is like hitting the nail squarely.to tell true
A nail clincher is used when shoeing a horse. After the shoe has been hammered on, the nail clincher is used to apply pressure to fully set the nails. Finger-tightening a bolt is to a wrench like a farriers hammer is to hoof clinchers. Answer brought to you by www.everythingsintack.net
hammer - nail screwdriver - screw
nail
A screwdriver.
A screwdriver.
ones called a nail the others called a screw. Also you hammer in a nail but screw in a screw. Hope this answer helps. :)
Nails are not screwed in they are driven in.
A nail has a smooth straight shaft and a flat head that requires a hammer to pound the nail in. A screw has rivets on the shaft and the head has a shape to it so a screwdriver is needed to screw in the screw.
It is not a good practice, but people do it. Some will tap a screw with a hammer to start a hole. Others will drive it all the way in. That is bad for the screw and the wood.Hammering a screw is counter-productive and will not have good results:When you hammer a nail into wood, the sides of the nail compress the wood. The compressed wood wants to expand pressing on the sides of the nail. The pressure keeps the nail in place preventing it from coming out of the wood.When you hammer a screw into wood, the threads of the screw "chew out" the wood pressing it downward, possibly compressing it in a downward direction, leaving little or no wood to hold the screw in place The compressed wood, wanting to expand may tend to expand upwards pushing the screw out.
I will strike the nail with the hammer. I strike the nail with the hammer. I struck the nail with the hammer. I have struck the nail with the hammer.
A hammer when swung in a downward motion contains energy. When the hammer strikes an object the energy is transfered to the object i.e a nail, causing the nail to move in a downward motion. One might ask the question how does a screwdriver work. The turning motion of the screwdriver upon a screw causes the screw to pull itself into, say, a piece of wood. Like the hammer energy is the important factor. Velocity and weight of the head
A hammer when swung in a downward motion contains energy. When the hammer strikes an object the energy is transfered to the object i.e a nail, causing the nail to move in a downward motion. One might ask the question how does a screwdriver work. The turning motion of the screwdriver upon a screw causes the screw to pull itself into, say, a piece of wood. Like the hammer energy is the important factor. Velocity and weight of the head
A screw driver is more high-tech than a regular nail driver or hammer. A screw is a more holding tool than a nail. It has metal ridges around it to hold it in place. A screwdriver is used for putting a screw in an area to fastening to objects and/or parts together