0
What else can I help you with?
What will be the result if silicon diode is replaced by the germinium diode?
The built is voltage would be lower than silicon diode,more leakage or reverse saturation current,poor thermal stability,high noise and greater conduction in comparison to silicon diodes.
What kind of noise would an alternator going bad make?
Bad bearings in an alternator would make a grinding or roaring sound. If a Diode Plate is failing you might hear a buzzing sound in the radio that changes pitch with the speed of the engine.
How can you make a bypass diode?
the diode is forward bias ANSWER: A bypass diode is used to bypass circuitry as soon as the diode is forward bias by 0.6 volts The use it to bypass to prevent damage to the circuitry
Can a reverse-biased diode junction generate shot noise?
Yes, a reverse-biased diode junction can generate shot noise, albeit typically to a lesser extent than in forward bias. Shot noise arises from the discrete nature of charge carriers, and in a reverse-biased condition, the noise is mainly due to the leakage current across the junction. This leakage current results from thermally generated minority carriers, leading to fluctuations in the current that manifest as shot noise. However, the magnitude of this noise is generally much lower than that observed in forward-biased operation.
How can a diode be made?
a diode can be make using p-n junction....form a p junction n form a n junction...and after joining them u cn make a p-n junction diode....for making a diode u ll ve to face doping problems
Can you make a laser with a PS1 diode?
yes
How do gnats make noise?
They make noise by making it.
Do goldfish make noise?
No, goldfish do not make noise.
Do clouds make noise?
No, clouds do not make noise.
Why is Avalanche photo diode used when compared to PIN diode?
The output current of a PIN diode is proportional to the light incident . Whereas in APD due to internal multiplication (Avalanche multiplication) of primary photocurrent, higher gains are possible. A small signal current output from the pin diode are to be amplified before applying to next associated receiver circuit. This includes thermal noise in the main signal, giving lower, receiver sensitivity. In case of APD, photocurrent is multiplied before encountering the thermal noise amplifier, giving increased receiver sensitivity.
What does HAD mean in a cameras specs?
Hole-Accumulation Diode. It allows more light to pass to each pixel, increase sensitivity, and reduce noise.
Do not make a noise convert in to passive voice?
you are forbidden to make a noise
