Yes it does
To release the hydrostatic transmission on a John Deere STX46, locate the release lever, typically found near the rear of the machine. Pull the lever outward to disengage the transmission, which allows the mower to be pushed manually. Ensure the mower is in neutral before releasing the transmission to avoid any unexpected movement. Once you're finished, re-engage the lever to restore normal operation.
2.25 qts per JD manual.
Go to your John Deere dealer and pay big bucks for their hydrostatic fluid or go almost anywhere else and buy a good quality hydraulic fluid.
On a Model 2320 John Deere tractor, the hydrostatic drive shaft is located between the engine and the hydrostatic transmission. It typically runs along the tractor's chassis and connects to the hydrostatic pump, allowing power transfer from the engine to the transmission for driving the tractor. For specific maintenance or troubleshooting, consulting the operator's manual or a service guide is recommended.
John Deere all-weather hydrostatic fluid or an equivalent type "F" automatic transmission fluid
By that serial number, I believe it should have been manufactured in 1995.
check the torsion dampener.
The John Deere 8345r has an ivt transmission.
It's not a 'lack of power'. It's the hydrostatic transmission limited on how fast it rotates to power the drive wheels
Lift up the seat. The black screw cap is the filler port, the rubber tube that extends down from it is the dipstick.
The John Deere STX38 typically uses the same hood design as other models in the STX series, particularly the STX30 and STX46. However, due to variations in production and design changes, it's best to verify compatibility through the part number. For a precise fit, checking with a John Deere dealer or parts catalog is recommended.
John Deere 450H Dozer hydralic transmission how can drain