answersLogoWhite

0

1 1/2 X 9 1/2 inches.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the Load capacity of 2X10 lumber?

About 3.39 lbs per linear foot


What is the floor joist span for acq treated lumber 2x10 16oc?

16ft 5 inches


List the various lumber sizes commonly used in building construction?

2x4, 2x6 and 2x10


What are the recommended dimensions for a lumber 2x10 to use in building a sturdy deck?

The recommended dimensions for a lumber 2x10 to use in building a sturdy deck are typically 1.5 inches in thickness and 9.25 inches in width. These dimensions provide the necessary strength and stability for supporting the weight and load of a deck structure.


What is the Weight of 2x10 lumber?

It depends. Dry ,around 30 lbs. Wet, triple that. Most treated wood is wet when you see it in the store, When it dries ,it shrinks,warps and cups.Sometimes a lot,sometimes a little.


What size of lumber level is needed to span a distance of 20 feet?

To span a distance of 20 feet, a lumber beam of at least 2x10 size is typically needed for adequate support.


What are the standard lumber measurements used in construction projects?

Standard lumber measurements used in construction projects include 2x4, 2x6, 2x8, 2x10, and 2x12, which refer to the dimensions of the lumber in inches. These measurements are commonly used for framing and structural components in buildings.


What is the recommended joist size for a deck?

The recommended joist size for a deck is typically 2x8 or 2x10 lumber, depending on the span and load requirements of the deck.


Why are 2X10 and 2X11 are the same?

The terms 2X10 and 2X11 typically refer to the dimensions of lumber, specifically the nominal sizes of wood boards. In this context, 2X10 refers to a board that is nominally 2 inches thick and 10 inches wide, while 2X11 is not a standard size, as lumber dimensions usually come in even increments. Therefore, if referring to actual dimensions, both 2X10 and 2X11 would generally result in similar products since they may round to the same size when considering actual measurements. However, if used in a different context, such as in a mathematical or computational sense, the terms would not be equivalent.


What is the real size of a 2x10?

A nominal 2x10 lumber board typically measures 1.5 inches by 9.25 inches in actual dimensions. This reduction in size occurs due to the milling process, which smooths and shapes the wood. The nominal size reflects the rough-cut dimensions before finishing.


Are -2x10 and -5x25 equivalent?

No, they are not equivalent. 2x10 = 20 and 5x25 = 125.


What is the answer to 6-2x10?

6-2x10 is equal to -14.