First unplug the wiring connection, then if the pto clutch has been on the mower for a while, remove the bolt from the bottom of the clutch, then spray PB Blaster in the bolt hole & let it sit for about 30 minutes. Make sure the belt has been removed from the upper pulley. Take a 3-Legged puller & attach around the clutch. The clutch may have to be tapped several times with a hammer to get it to move, or let the penetrating spray work longer.
what are the torque specs for clutch and fly wheel model 5700
Check out the related link and look under centrifugal clutch. It is surprising that the same clutch in a chain saw is in a John Deere Gator.
To replace the clutch on a John Deere Model M, start by disconnecting the battery and removing the necessary components to access the clutch assembly, such as the hood and the flywheel cover. Next, remove the clutch release lever and the retaining bolts holding the clutch in place. Carefully take out the old clutch and replace it with the new one, ensuring proper alignment. Finally, reassemble the components, reconnect the battery, and test the clutch to ensure it operates smoothly.
a john deere 630 is a two cylinder tractor that has a hand clutch two wheel drive
A John Deere model A holds 9.25 qts of oil.
The John Deere 850 is a compact tractor and the most recent model available is John Deere Z850A. This newer model offers more horsepower and hitching capability compared to the John Deere 850.
It will fit according to John Deere Attachment Fit Guide
.18
The best place to find a John Deere Model A tractor would be on the official John Deere site. Their site would give one information on where a tractor can be purchased.
clutch went out on mine
The John Deere model 345 with the serial number M00345A087311 was manufactured in 2001. The first letter in the serial number indicates the model year, and for John Deere, "M" corresponds to 2001.
The John Deere model 60 was made from 1952-1956. Here's a website full of information about the model 60...see related link...