What makes a supercharger squeal like a bearing is going out
Yes, you can replace the bearing in the cone of a supercharger on a 1993 Pontiac SSEi with a 3.8L engine, but it requires disassembling the supercharger. This involves removing the supercharger from the engine, disassembling it to access the bearings, and then replacing the faulty bearing. It’s important to follow specific procedures and torque specifications during reassembly to ensure proper function. If you're not experienced with such repairs, consulting a professional or referring to a repair manual is recommended.
When you drive your supercharger without oil it will become extremely hot. When these supercharger is extremely hot it can result in burning out the bearing or causing the seal to leak.
http://www.paulstravelpictures.com/GTP-Supercharger-Oil-Change/index.html
wheel bearing, gearbox or wind noise Supercharger?
This link helped me out quite a bit... http://www.paulstravelpictures.com/GTP-Supercharger-Oil-Change/index.html
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
To change the supercharger coupler on a 1995 Riviera, first, disconnect the battery and remove the supercharger assembly from the engine. Carefully detach the supercharger from the intake manifold, then remove the coupler from the supercharger's rotor assembly. Install the new coupler, ensuring it is seated properly, and reassemble the supercharger, followed by reconnecting it to the intake manifold and the battery. Always consult a repair manual for specific torque specifications and detailed instructions.
To change the supercharger oil on a 1997 Oldsmobile LSS, start by locating the supercharger's oil fill plug, usually found on the side of the supercharger unit. Remove the plug and use a pump to extract the old oil from the supercharger reservoir. Once drained, replace it with the appropriate supercharger oil, ensuring it's filled to the correct level as specified in the owner's manual. Finally, reattach the fill plug securely and check for leaks.
To change your bearing, you need to turn left, right or make an about turn in the given vessel that you are travelling in.
Go to the Whipple website for info.
hi how to change supercharg oil nissan xterra 2002