answersLogoWhite

0

Why would you put a B20B in to a CRX, that's the engine out of a CRV, and yes, it will be a pain in the ass. Why not do one of the common swaps such as a B16 or a B18. If you can get your hands on a JDM B18 Type-R, that should be more than sufficient and a lot easier to pull off.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you put a b20b in your 88 crx si and is hard?

no it is nard hard considering its a B seiries but you will ned a p28 ECU , aftermarket B series to 88-91 hasport crx mounts, a standard tranny and a complete B20B swap not a longblock or shortblock. - *PHaZE II* -


Will 88 crx parts fit on 87 crx parts?

no


How do you repair the alternator on a 1984 Honda CRX?

84 CRX ??? help me here CRX went 88 to 91/92 then came Del Sol CRX???


Is there a way to make tail lights from a 1988-1991 CRX fit a 1987 CRX si?

88-91 Crx parts will not fit on a 86 crx. The 86 Crx has wider lights.


Are 1988 crx parts interchangable with a 1990 Honda CRX?

many parts are interchangable but some dont like for example 90 crx tailights will not fit on a 88 cause the 88 crx has bigger tailights while 90 has thinner. another example is the seat ralings are different but u can use the 90 seats if u swap the railing for 88 etc.


What is the fuel injector size for a 1991 Honda CRX hf?

88-89 hf crx uses 190cc 90-91 hf crx uses 240cc


Will a cold air intake from a 1990 crx fit on an 86 crx si?

Yes, I have a 86 crx si and the one I have is from a 88-91 civic/crx. any ? contact me at sconesnbones@comcast.net for any info...


Does a 1988 crx headlight fit a 1987 crx yes or no?

No. 88-91 have a different body style than 84-87


Is the 84-87 and 88-91 crx corner lights the same?

No


What fluid is used for 88 Honda CRX manule transmission?

Dextron-Mercon


Will an 88 Prelude 2.0 Si fit into an 87 CRX?

With some modifications, yes.


Can a 88 Honda CRX headlight fit a 87 Honda CRX?

Yes, the headlights from an 88 Honda CRX can fit an 87 Honda CRX, as both models share similar design characteristics and dimensions. However, it's important to check for any specific differences in wiring or mounting clips that may exist between the two model years. Overall, using parts from these closely related models is generally feasible.