0
Assumptions:
- US dimension system
- Standard 20 foot overseas shipping container - inside dimensions 7 1/2 feet wide, 7 feet high, 19 1/2 feet long
- Standard 90 pound bale (some bale sizes are different) - dimensions 18 inches wide, 14 inches high, 36 inches long
Using these assumed dimensions, you can pack 32 bales in one layer, 6 layers high, for a total of 192 bales in a 20 foot container weighing a total of 17,280 pounds, or a little more than 8 1/2 tons.
Be aware that I'm using a packing plan that allows for no odd-shaped or oversized bales, and it will be very difficult to get the top layer packed in place, as the hay will go right to the top of 7 feet.
You should be able to just double this for a 40 foot container.
What else can I help you with?
How many bales of scrap you can load in 40 feet container?
The number of bales of scrap that can be loaded into a 40-foot container depends on the size and weight of the bales. Typically, a standard 40-foot container can hold about 25 to 30 metric tons of material. If we assume each bale weighs around 500 kg, you could fit approximately 50 to 60 bales, depending on the specific dimensions and packing efficiency. Always consider weight limits and load distribution when determining the exact number.
How many bales of 500kg in 40ft container?
A standard 40-foot container can typically hold around 26 to 30 metric tons, depending on the specific dimensions and weight limits. Since each bale weighs 500 kg, you can fit approximately 52 to 60 bales in a 40ft container. However, the exact number may vary based on the packing method and the dimensions of the bales. Always consider weight restrictions and the specific container's internal dimensions for precise calculations.
How many small square bales of hay are in a large square bale?
It depends on a lot of different factors, including the type of forage you're baling, where you live, soil quality and type, forage type, whether or not you irrigated and/or fertilized, and so on. Plus, not all round balers are the same. Some will drop heavier bales than others.
How many large square bales will you fit in a forty foot shipping container?
Let's assume the container is 40 ft long and a ft wide and b feet tall, and the bales are y feet square. You can put 40/y bales along one wall, or at least the whole number part of the answer because presumably you can't cut the bale. ( e.g. if y is 3 ft, then you could get 13 bales along the wall with a foot of empty space). With similar maths you can work out that you can get (the whole number part of ) a/y, and if you are allowed to pile them up, the whole number part of ) b/y layers. To get the number in one layer multiply the first answer by the second, and to get the volume filling number, the answer to this by the third.
How many bales of hay will fit on a 8x30 foot trailer?
This depends on a few factors: Forage quality, forage biomass in terms of lbs/acre, forage content, hayfield/pasture conditions, and the size/weight of the round bale. Some areas can get get 3 bales per acre, especially if the bales are packed light and small, whereas others may only get 2 or 3 acres per bale.
How much horsepower for a hay baler?
It depends on the size of the baler. A 50 horsepower tractor is sufficient for a 90 pound bale size machine, while a big round bale machine needs closer to 100 hp. The full-size 4 foot by 4 foot by 8 foot 2,000 pound bales work most efficiently on a 150 to 200 hp tractor.
How many pounds does a 4 ft by 4 ft bale of hay weigh?
The weight of a hay bale can vary widely depending on what type of crop was baled, what type of bale you are referring to and how heavy the baler operator wanted to make the bales. The lightest bales you will find are composed of straw. Straw bales are typically lighter than a hay bale, no matter how tightly packed they are, because there is very little moisture to add to the weight of that bale. Grass-hay-only bales are a little heavier, but grass-legume-mix bales are even heavier. The heaviest bales tend to be those that are comprised of only legume-hay. However, hay aside, silage bales (or baleage) are the heaviest, no matter what type they are: small square, large square or large round. Small square bales made up of grass-hay like timothy may weigh only around 60 to 75 lbs, whereas one made up of alfalfa that is clean and nicely compacted can weigh upwards of 130 lbs. Large square bales can weigh around 1000 to 1800 lbs (again, depending on the fodder), and large round bales (those that are 4 ft. by 4 ft. or 5 ft. by 6 ft.) can weigh around a ton (2000 to 2200 lbs).
How many standard pallets fit into a 40 foot pallet wide container?
20
How much cbm in a 40 ft container?
A standard 40-foot shipping container typically has a capacity of about 67 to 76 cubic meters (cbm), depending on the specific type and design of the container. The most common 40-foot container, known as a standard 40' dry container, usually has a volume of approximately 67.7 cbm. If it’s a high-cube container, it can hold around 76.4 cbm.
How many small hay bales to one large round bale?
This will entirely depend on cubic feet of each bale. with only 5 foot as the measurement it is impossible to give a 100% accurate answer. However where I live they sell 5'x6'x5' and 6'x6'x5' round bales each size having a variable weight depending upon the type of hay and when it was baled. Lets assume that the small square bales are 16"x14"x41" (Again a locally sold size). For the first round bale 5x5x6 the cubic feet would be 150 cubic feet, for the small bale it would be roughly 5.3 cubic feet. That means that 28.3 small bales would be needed to equal the same size as the round bale. The second bale is larger at 6x6x5 which equals 180 cubic feet, you would need roughly 33.9 small bales. However overall bale size (Dimensions and weight) is variable according to the type of hay used, growing conditions of the hay, and the baler used. It is over all more accurate to go by weight rather than volume.
How many skids fit on a container?
The number of skids that fit in a shipping container depends on the container size and the dimensions of the skids. A standard 20-foot container can typically hold about 10 to 11 standard pallets (skids), while a 40-foot container can accommodate around 20 to 22 pallets. It's essential to consider the dimensions of both the container and the skids, as well as weight restrictions, when calculating capacity.
What is the volume of a container van?
The volume of a standard container van, such as a 20-foot or 40-foot shipping container, can be calculated by multiplying its internal dimensions. A 20-foot container typically has a volume of about 33 cubic meters (1,172 cubic feet), while a 40-foot container has a volume of approximately 67 cubic meters (2,372 cubic feet). These values can vary slightly based on specific container models and manufacturers.
