0
What else can I help you with?
How many square meter will excavate a backhoe per hour?
A square metre is a measure of area and it is not capable of any action! A backhoe will excavate a volume of material : this is measured in cubic metres, not square metres.
What is the ground pressure on a D6N LGP?
The ground pressure on a D6N LGP (Low Ground Pressure) dozer is around 5.5 psi (pounds per square inch). The LGP configuration allows for better weight distribution and reduced ground pressure, making it ideal for working in soft or sensitive ground conditions.
What is 560psi to pounds?
The "p" in "psi" is pounds. If you are asking what weight would produce a pressure of 560 pounds per square inch, then it depends on what area that weight is on. A 560 pound weight on an area of 1 square inch would produce a pressure of 560 psi A 1120 pound weight on an area of 2 square inches would also produce a pressure of 560 psi.
What is ground pressure of cat 245 excavator?
127.5 N per square meter
How many square inches a tire of highlander touches ground?
The answer will depend on the tyre pressure and the mass of and in the Highlander.
How much pressure would an ordinary human who is standing exert on the ground?
An ordinary human standing exerts a pressure equivalent to the body weight divided by the area in contact with the ground. On average, this pressure is about 10-15 pounds per square inch (psi).
How do you calculate ground pressure of an excavator?
To calculate the ground pressure of an excavator, divide the total weight of the excavator by the area of its tracks or wheels in contact with the ground. Ground pressure is typically expressed in pounds per square foot (psf) or kilopascals (kPa). The formula can be represented as: Ground Pressure = Total Weight / Contact Area. Accurate measurements of the contact area can be obtained from the manufacturer's specifications or by measuring the dimensions of the excavator's tracks or wheels.
How does Boggs die in The Hunger Games?
Boggs was blown to pieces by a bomb after he stepped on a pressure sensitive square in the ground
How much pressure you can put on the backhoe tire 580?
The recommended tire pressure for a Case 580 backhoe typically ranges between 30 to 35 psi (pounds per square inch) for front tires and about 20 to 25 psi for rear tires, depending on the specific tire type and load conditions. It's essential to check the manufacturer's specifications for the exact model and tire type, as maintaining the correct pressure ensures optimal performance and safety. Always verify tire pressure when the tires are cold for the most accurate reading.
Is the atmospheric pressure equal everywhere?
No - that's why we get winds. Winds are caused by air flowing from high-pressure areas to low-pressure zones. AVERAGE atmospheric pressure at ground level is 14 psi. (pounds per square inch)
How do you convert square feet to ground?
You can't convert square feet to ground since these terms are not totally related to each other. "square feet" measures the area of the object while "ground" is surface of the Earth.
What force acting on an area of 0.5 meter will produce a pressure of 500 pascal?
0.5 meter is not an area, that's a length. In general, the relation is: pressure (in pascal) is force (in newton) divided by area (in square meters).
