Engine oil = 9 qt
Torque converter / reverser = 8 qt AW46
Transaxle = 19 qt or 20 qt AW46 (MFWD?)
Reservoir = 44 qt AW46
These are refill volumes, more needed if lines are drained.
a john deere 3020 can hole 29ish gallons for a diesel engine. go to www.tractordata.com and search john deere 3020. it will give you all sorts of info.
It depends on the tractor.
Hi Mine uses 134a Dave
There is no parking brake. You hold the tractor in place by putting it in park like a car with auto trans.
Diesel will hold 12 quarts and Gas will hold 8 quarts
The John Deere 2640 tractor typically holds about 5.5 quarts of engine oil when using a standard oil filter. If you're changing the oil without replacing the filter, it may hold slightly less. Always refer to the owner's manual for the most accurate information regarding oil capacity and specifications.
Oh, dude, the John Deere 2550 tractor typically holds around 15.5 gallons of oil. But hey, who's counting, right? Just make sure you keep that bad boy lubed up and ready to roll!
7 qts
As much as the fuel tank can hold
8qts
Crank tractor set tractor throttle at 1500 rpm turn steering wheel all the way to the right hold it for about 10 seconds then turn it to the left and hold it for about 10 seconds repeat several times and the air should be gone
there are 2 bolts at the front that hold down the front plate with hood latch remove those bolts and the whole front plate with latch comes off.