front hud
According to my Chilton's Auto Repair Manual : The 225 slant six cylinder engine in a 1978 Dodge has spark plugs gapped at : ( .035 inch )
For a John Deere 225 Excavator, it is recommended to use hydraulic oil that meets the ISO 32 or ISO 46 specifications, depending on the operating temperature conditions. John Deere's own hydraulic oils, such as the J20C or the Hy-Gard fluid, are suitable choices. Always refer to the owner's manual for specific recommendations and ensure the oil meets the necessary performance standards for optimal operation.
When changing the spark plugs of an engine, a person should leave the right gap size. The Spark plug gap size of this engine would be .39 inches
the 225 was a slant 6 not a v8
The 1997 model Mercury, 225 hp EFI uses a NGK BR8HS plug, gapped to .035 in.
.028 on plugs and .018 on points
Njkb7h3 10
To install the belt on a John Deere Z225 mower, first, disconnect the battery for safety. Remove the deck by loosening the belt tension and unbolting it from the mower. Next, thread the new belt through the appropriate pulleys, ensuring it follows the correct routing as indicated in the owner's manual. Finally, reattach the deck, adjust the belt tension, and reconnect the battery before testing the mower.
.40
The one closest to the radiator is number 1.
The front snowblower attachment on the GT225 is powered by the engine through a belt that extends to the pulley on the bottom of the engine. ( it is the same pulley that drives the mower deck.) The mower deck must be removed. Bret
225 years old, in 2010