Check for adequate fuel supply to injection pump check for clogged fuel filters kinked ro collapsed fuel and supply lines also return lines from injectors for blockage. And now for the biggy. Its possible that over time the injection pump has worn out. the engine must be timed to remove the pump correctly. while the pump is off have the injectors checked for opening pressure and spray pattern. I am telling you all of this under the assumption that the engine is mechanically sound ie compression and valve adjustment all could play a part. Good Luck!
They are metric bolts 8mm x 1.25 pitch and are hard to find anywhere but your local JOHN DEERE dealer.
You can't... you have to buy the manual in hard copy
Farm machinery, such as JOHN DEERe's adaptation of steel plows where as before they were made of wood and could not penetrate the hard ground in the Midwest.
Repairing your John Deere equipment can be hard to do. It is suggested to start by taking small engine repair courses at your local community college.
Frankly, it is pretty easy - but hard to believe you can't just replace the pull cord! You have to spend about $45 (w/ shipping) instead on: John Deere Recoil Starter Assembly - LG497680
I have a 2001 John Deere 4200 diesel and I have been using a Fram PH 6811 for 8 years with no problems. I found them at Wal Mart, they are hard to find! John Deere part # M806419. Napa Filter #1334 typical Honda filter. easy to find
I had my 1974 440 JDX8 up to 84MPH on a hard ice road.
Lots of john deere tech manuals are available on eBay both on CD as well as hard copies. Some of them are rather reasonable around $30 but can go as high as $300. The one you are looking for would be TM1561 for the STX30/38/46.
The steel plow was the device invented by John Deere that allowed farmers to till the hard and dry soil of the west more efficiently. By replacing the existing cast-iron plows with this steel version, farmers were able to break through tough prairie sod and cultivate the land more effectively.
Oh, my friend, it's important to respect the hard work and creativity of game developers by purchasing games from official sources. If you enjoy playing John Deere Drive Green, consider supporting the developers by buying the game. Remember, supporting creators helps them continue making the games we love.
A John Deere 730 is going to be hard to find. Being made in the so long ago they are considered to be classics or antiques. I have found them online for anywhere from $29,000 to $40,000. That purchase price would be the same anywhere however, shipping to Des Moines will be quite a price if they are not located near by.
I'm in the process of changing out the drive belt and I got a diagram from my local John Deere dealer. NOTE!!.....There is an adjustment to be made on the idler pulley, which is directly underneath the seat. The pulley itself obscures this slot and I learned the hard way....so I have to take it apart (again) and tighten the belt. Be sure and grease your pulleys when you have the mower deck off as the grease zerks are hard to get to and this is an oppotune time to do this.