0
What else can I help you with?
How many ppm is 5 gallons of chlorine in 1 millions gallons of water?
To find the concentration in parts per million (ppm), you would need to calculate the ratio of chlorine to water. In this case, to determine the concentration of 5 gallons of chlorine in 1 million gallons of water, you could use the following calculation: (5 gallons chlorine / 1 million gallons water) x 1,000,000 = 5 ppm.
How much chlorine bleach to make 2 gallons of 100ppm?
To make 2 gallons of water with 100 ppm of chlorine bleach, you would need to add 2.11 milliliters of bleach.
How much chlorine for 4400 gallons of water?
For 4400 gallons of water, you would typically need around 1-2 gallons of liquid chlorine or about 1-2 pounds of granular chlorine to achieve the recommended concentration for effective disinfection. It's important to always refer to the manufacturer's instructions on the chlorine product for more precise dosing guidelines based on the concentration of the chlorine product.
How many kilos of chlorine need for 135600 liters of water in a pool?
Using regular chlorine bleach (5% solution) at a rate of 6.5 ounces of bleach per 1000 gallons of water gives a chlorination level of 2ppm per 1000 gallons. To get the rate for 2500 gallons, multiply 6.5 by 2 to get 13 ounces for 2000 gallons, then divide 6.5 by 2 to get 3.25 ounces (the amount of bleach needed to treat 500 gallons) and add that to the 13 ounces to get a total of 16.25 ounces of chlorine bleach per 2500 gallons of waterat a level of 2ppm.For a swimming pool, you would likely want a 3ppm chlorine to water ratio (24.375 ounces bleach per 2500 gallons water).
How many gallons of chlorine in an olympic size pool?
Olympic swimming pools use about 650000 gallons of water, so if you're trying to shock one using 10% liquid chlorine, you would need about 200 gallons of liquid shock - or if you're only adding choline as a primary sanitizer, not as a shock, you'd use about 65 gallons.
What are the solute and solvent in pool water?
The solvent would be water, the solute would be the chlorine chemicals
How much chlorine is needed for 350 gallon hot tub?
You would typically need to add around 2-3 ounces of chlorine for every 350 gallons of water in a hot tub. However, it's important to test the water regularly and adjust the chlorine levels based on the specific conditions of your hot tub.
How much would 200 gallons of water weigh?
200 gallons of water would weigh approximately 1,667 pounds.
Can you use regular chlorine in a swimming pool?
yes, but it takes many gallons of clorox A: Clorox is only 5%. You would have to use 5 to10 as much of it then swimming pool liq. chlorine at 12.5%. The answer would be NO. You would end up using algaecides and other products in order to maintain the water. It could get quite costly for you.
How many gallons of water is 150 tons?
There are approximately 224 gallons of water in 1 ton. Therefore, 150 tons of water would be around 33,600 gallons.
How much chlorine bleach to disinfect 2000 gallons of water?
For disinfecting water, you can use household bleach that contains 5-8.25% sodium hypochlorite. To treat 2000 gallons of water, you would need about 1 cup (8 oz) of bleach. Mix the bleach thoroughly and let it stand for at least 30 minutes before using the water.
How can you remove chlorine from well Water?
You would need to install a water filtration system that also removes Chlorine from the water. Well water normally does not have chlorine it it so the source of the contamination would need to be determined and removed, or a new well drilled.
