Yes it will fit.
need a color wire schematic for main wire harness
On a John Deere F935 mower, the ignition fuse is typically located in the fuse panel, which is generally found under the seat or near the battery. To access it, you may need to remove a cover or panel. Refer to the operator's manual for specific details on the location and identification of the ignition fuse for your model. Always ensure the mower is turned off and disconnected from power before inspecting the fuse.
type F
1990 to 1993
To change the wheel bearing on a John Deere F935, first, safely lift and secure the mower using jack stands. Remove the wheel by loosening the lug nuts and then detach the hub by unscrewing the retaining bolts. Take out the old bearing and clean the housing before installing the new bearing, ensuring it is properly seated. Reassemble the hub, reattach the wheel, and torque the lug nuts to the manufacturer's specifications.
Your John Deere 322, serial number M00322x596318 is a 1989 model year.
The John Deere Model F935 was produced in the late 1990s, specifically from 1995 to 1998. The serial numbers for this model typically start around 100001 and go up from there. If you're looking for a specific serial number or year of manufacture, it would be best to check the serial number plate on the machine itself.