Average depth. Depth of the deep end @ 8'.
Depth of the shallow end 3'.
Add the two together and divide by 2 = average.
Ken
Multiply avg length times avg width times avg depth to get cubic feet them multiply by 7.48 to get gallons Question can't be answered without third deminsion. Formula: length times width times depth times 7.48 equals gallons
23460 gal. plus or minus the Grecian. length x width x avg depth (8.0+3.5=11.50 divided by 2 = 5.75 avg. depth x 7.48. Rounded to 7.5. k
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
Here is the formula for calculating gallons of water to fill a swimming poolCalculate Your Pool's Water VolumeOverview:In order to figure out proper doses of chemicals for your pool, you need to determine how many gallons of water it holds. To do that, you need to know four different numbers: the length, width, average depth, and a multiplier that determines gallons. Here is the formula:Length * Width * Average Depth * Multiplier = GallonsDetermine the Multiplier:Rectangle, square, or free-form pool:multiplier = 7.5.Round or Oval pool: multiplier = 5.9Determine the Average Depth:To determine the average depth in a pool where the bottom slopes, measure the shallow end, the deep end depth. Add them together and divide by two (2).Example: Shallow End = 2'. Deep End = 10'2' + 10' = 12'; 12'/2 = 6' Average Depth
L x W x avg. depth x 7.5
Length X Width X Avg depth X 7.5=gal
Multiply avg length times avg width times avg depth to get cubic feet them multiply by 7.48 to get gallons Question can't be answered without third deminsion. Formula: length times width times depth times 7.48 equals gallons
length X width by avg depth x 4.5 if a rectangle
L x w x avg depth x 7.5
pool volume is 15 x30x4 = 1800 cu ft there are 7.48 gallons in one cu ft 7.48*1800 = 13,464 gallons depth of pool is 12 x 4 = 48 inches 13464/48 = 280.5 gallons per inch
You could calculate it by finding the volume of water in the pool (in cubic metres), the average depth of the pool (in metres) and the width of the pool (also in metres).Then, linear metres = volume/(average depth*width).However, rather than calculating the linear metres, it might be simpler to just measure the length of the pool.
A pool this size can hold up to 17,770 gallons of water. This would completely fill the pool to the very top.
23460 gal. plus or minus the Grecian. length x width x avg depth (8.0+3.5=11.50 divided by 2 = 5.75 avg. depth x 7.48. Rounded to 7.5. k
Very expensive.
It is 2250 cubic feet.
Cannot be answered with only these measurements. You need to specify what shape the pool is. Also, for a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.