Concrete is man-made.
4.074 cubic yards for every foot the slab is thick.
You can't express a volume of concrete in yards.
Please clarify what linear measure you want to calculate: for example its length, width, diagonal, perimeter, etc.
You need to specify the slab's width and the length as well.
A solid slab is a reinforced concrete slab which is supported by beams or walls..
The recommended footings for a concrete slab are typically made of reinforced concrete and should be at least 6 inches thick and extend below the frost line in your area to prevent shifting or cracking.
Some contractors recommend and use cinder in the sunken parts of a reinforced cement concrete slab. Others caution against it in construction where a lot of seepage can occur because cinder can have a tendency to retain the water.
V of a circular slab = thickness of the slab multiplied by (pi multiplied by the radius2)
Carl E. Mickelson has written: 'An investigation on the effectiveness of shear reinforcement in column flat slab connections' -- subject(s): Reinforced concrete, Testing, Reinforced concrete construction
Different types of Slabs :1. Conventional solid slab:-- the slab which is braced with beams and columns is called conventional slab this kind of slab is small whereas the depth of the beam is large and load is transferred to beams and from beams to columns. These types of slabs are used in constructing Floors of multi stored building. It is of two types.a) One-way Slab.b) Two Way Slab.2. Flat Slab:-Flat slab is a reinforced concrete slab secured directly by concrete columns or caps .flat slab doesn’t have beams.3. Waffle slab:- Waffle slab is a reinforced concrete roof or floor containing square grids with deep sides. This kind of slab is majorly used at entrance hotels, malls, restaurants
The cross-sectional area of a concrete slab is the total area of the slab when viewed perpendicular to its length and width. To calculate the cross-sectional area, you multiply the length of the slab by the width of the slab. This measurement is crucial for determining the amount of concrete needed for a project and for ensuring the structural integrity of the slab.
to answer your question, one must know the thickness of the slab? then only the weight can be calculated
Floating slab is a type of mat foundation. It consists of a hollow mat formed by a grid of thick reinforced concrete walls between two thick reinforced concrete slabs. The weight of the soil excavated from the ground is equal to the weight of the entire building, so that pressure on the soil is unchanged from the original condition, making the building float on the soil
Floating slab is a type of mat foundation. It consists of a hollow mat formed by a grid of thick reinforced concrete walls between two thick reinforced concrete slabs. The weight of the soil excavated from the ground is equal to the weight of the entire building, so that pressure on the soil is unchanged from the original condition, making the building float on the soil
Two-way slabs are rectangular reinforced-concrete slabs that are supported on all sides. The reinforcement is placed perpendicular to the sides.
Supended slab are slab not sit on the ground directlySuspended slab is a slab supported by beams.