You have to have a combination. If you have a key lock you don't need a combination, all it is is a lock that says master and a key to turn it and then it opens what you have in it.
You should try out all of the three-digit combination. There are 10x10x10 = 1,000 possible combination (assuming digits 0-10).
It depends on the make of the lock. Many time you need to know the combination. Sesame locks require a pin that goes in the shackle hole when the shackle is 180 degrees from open. Master combination locks with a scroll combination require a reset key that can only be used when the current combination is known in order to change. Other padlocks require the lock to be open and the shackle turned 180 degrees and pushed down while setting the combination.
well if you have a knife or a paper clip you can pick it
To open a vault lock box with a 3-code lock, first ensure you have the correct combination. Start by rotating the first dial to the first code number, then turn the second dial to the second code number, and finally, turn the third dial to the third code number. After entering the complete combination, pull or push the lock mechanism to open the box. If the code is correct, the lock should disengage; if not, double-check the code and try again.
You have to have a combination. If you have a key lock you don't need a combination, all it is is a lock that says master and a key to turn it and then it opens what you have in it.
To open a luggage lock without the combination or key, you can try using a lock picking tool or contacting the manufacturer for assistance. You may also consider hiring a locksmith to help you open the lock.
this is easy. just use a clip!
If you do not have the combination, there is no way to open the lock. A master combination would defeat the purpose of having the lock.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
You dont! Whoever said the first answer is stupid i really want to know how and this is the answer i get UUUUUGGGGGGHHHHH
By definition, a combination lock cannot be picked, as it has no key. It can be "cracked" in some cases where putting pressure on the lock and diagnosing the dial can reveal the combination. It can also be "bypassed" where tools are used to open the lock without the use of the combination. Neither of these are "picking" the lock however. In order to pick a lock, it must have a key of some type.
When facing the front of the lock, input the current password and open the lock. While open, press the black button on the left side and change the combination to what you want, then release. The button allows you to change letters without moving the internal tumblers.
To open a combination Samsung luggage lock, first make sure the lock is set to the correct combination. If you don't know the combination, you may need to reset it if your model allows for that. Align the dials to the numbers in the correct sequence while pulling up on the lock mechanism. If the combination is correct, the lock should release and open.
The best way to open a combination lock is to enter the combination. If this isn't possible, a hacksaw or bolt cutter may do the trick.
There really is no way. If you put the lock on something open important, you may have to cut the lock.