answersLogoWhite

0

What else can I help you with?

Continue Learning about Math & Arithmetic

What is the smallest main scale division in a vernier scale with 25 divisions?

In a vernier scale with 25 divisions, the smallest main scale division is typically determined by the relationship between the main scale and the vernier scale. If the vernier scale is designed to provide a finer measurement, it often allows for a reading that is a fraction of the main scale division. For example, if the main scale has divisions of 1 mm, the smallest division on the vernier scale would allow for readings accurate to 0.04 mm (1 mm / 25), giving a finer resolution than the main scale alone.


What are the smallest divisions on the main scale and the vernier scale of the vernier calipers?

The smallest division on the main scale of vernier calipers is typically 1 millimeter (mm). On the vernier scale, the smallest division is usually 0.02 mm or 0.01 mm, depending on the precision of the caliper. This allows for measurements to be read with greater accuracy, often up to 0.01 mm.


How do you read the vernier in theodolite?

To read the vernier on a theodolite, first ensure that the instrument is level and stable. Locate the main scale and the vernier scale; the reading is determined by finding the line on the vernier that aligns best with a line on the main scale. Count the number of whole divisions on the main scale up to this point and add the value of the aligned vernier division to get the final reading. This process allows for precise angular measurements, typically in degrees or minutes.


What is the difference between main scale and vernier scale of vernier caliper?

The main scale of a vernier caliper is the fixed scale that provides measurements in standard units, typically in millimeters or inches. In contrast, the vernier scale is a sliding scale that allows for more precise measurements by providing fractional divisions between the main scale markings. The primary difference lies in their function: the main scale gives the whole number measurement, while the vernier scale enables the user to read additional precision by aligning markings to find the exact value. Together, they allow for accurate measurements of small dimensions.


What is LC of vernier Calipers?

The least count (LC) of vernier calipers is the smallest measurement that can be accurately read using the instrument. It is determined by the difference between one main scale division and one vernier scale division. For a typical vernier caliper with a main scale division of 1 mm and a vernier scale that has 10 divisions corresponding to 9 mm on the main scale, the least count would be 0.1 mm (1 mm - 0.9 mm). This means that measurements can be taken with a precision of 0.1 mm.

Related Questions

What is the smallest main scale division in a vernier scale with 25 divisions?

In a vernier scale with 25 divisions, the smallest main scale division is typically determined by the relationship between the main scale and the vernier scale. If the vernier scale is designed to provide a finer measurement, it often allows for a reading that is a fraction of the main scale division. For example, if the main scale has divisions of 1 mm, the smallest division on the vernier scale would allow for readings accurate to 0.04 mm (1 mm / 25), giving a finer resolution than the main scale alone.


Why 9 division of main scale 10 divisions of vernier sacle in a vernier calipers?

The 9 divisions on the main scale correspond to a length equal to 10 divisions on the vernier scale because the 10 divisions on the vernier scale cover a distance that is slightly shorter than the 9 divisions on the main scale. This difference enables the user to make more precise measurements by comparing the alignment of the two scales to determine the measurement with greater accuracy.


How do you measure the least count of vernier?

The least count of a vernier scale is calculated by dividing the smallest division on the main scale by the total number of divisions on the vernier scale. This calculation gives the value of one vernier division.


What is the smallest main scale division in a vernier scale with 50 divisions?

The smallest main scale division in a vernier scale with 50 divisions is 1/50th of the main scale division. This is because each division on the vernier scale corresponds to 1/50th of a main scale division, allowing for more precise measurements to be made.


A vernier calliper has 20 divisions on the vernier scale one centimeter on main scale is divided into 20equal parts Find the least count of vernier parts?

The least count of the vernier caliper is calculated by dividing the smallest division on the main scale by the total number of divisions on the vernier scale. In this case, 1 cm on the main scale is divided into 20 equal parts, so the least count is 1 cm / 20 = 0.05 cm or 0.5 mm.


How do you calculate readings of sextant?

first find out least count of main circular scale in degrees,then divide least count of main scale by total divisions on cylindrical scale(this cylindrical scale works as vernier scale for fist one,its least count will be in minutes) then further divide least count of cylindrical scale by total divisions of small vernier scale which touches it,(this small scale works as vernier scale for cylindrical scale and its least count will be in seconds).


How do you calculate least count of spectrometer?

The value of each main scale divisions is half a degree(30') . The number of vernier scale divisions is 30. 29 main scale divisions are divided into 30 vernier scale divisions (30 VSD = 29 MSD ) Therefore value of 1 VSD = 29/30 MSD. Least Count (L.C.) = 1MSD - 1VSD = 1MSD - 29/30 MSD = 1/30 MSD = 1/30 x 30' (L.C.) = 1' (1 minute)


How do you find radius of cylinder when the main scale reading is 35 division and 4 division of vernier scale coincides with a main scale division?

The vernier scale provides a more precise measurement by showing how much the object has moved past a whole number on the main scale. Since 4 divisions of the vernier scale coincide with one less division on the main scale, each division on the vernier scale represents 1/4 of a division on the main scale. In this case, the total reading would be 35 main scale divisions plus 4 divisions on the vernier scale, giving a total of 35.25 divisions on the main scale. To find the radius of the cylinder, you would measure the circumference with a tape measure or string and then divide that measurement by 2π to find the radius.


What are the smallest divisions on the main scale and the vernier scale of the vernier calipers?

The smallest division on the main scale of vernier calipers is typically 1 millimeter (mm). On the vernier scale, the smallest division is usually 0.02 mm or 0.01 mm, depending on the precision of the caliper. This allows for measurements to be read with greater accuracy, often up to 0.01 mm.


How do you read vernier calipers?

We need two readings. One is Main scale reading and the other is vernier scale reading. Main scale reading will be read on the main scale. We need an indicator to read it. Right? The marking ie zero of the vernier is that indicator. So the reading on the main scale which has been just crossed by zero of the vernier is taken as Main scale reading. Now to get VSR, we need vernier scale coincidence. How do we get this? Any one of the divisions of the vernier will be found coincided with some divisions marked on the main scale. We don't worry about that main scale division but we concentrate only on the vernier scale division. This is VSC This VSC is to be multiplied by least count. So VSC x LC gives the VSR Now MSR + VSR gives the accurate reading.


Can you get low least count ther vernierhow and why?

To use the vernier scale, you find the reading on the fixed scale immediately to the left of the pointer, then you look along the sliding scale until you come to the place where the divisions on the fixed and sliding scales match up, and this gives you the subdivision of the main fixed scale divisions. Thus if the fixed scale is divided into mm, you will be able to read 1/10 mm from the vernier. I suggest you look up Wikipedia 'Vernier Scale' which has illustrations of this


What is the zero error and the reading uncertainty for vernier caliper?

The zero error for a Vernier caliper is the systematic error that occurs when the jaws do not exactly close at zero. The reading uncertainty for a Vernier caliper typically depends on the precision of the scale divisions, with the main scale usually indicating whole millimeters and the Vernier scale providing readings to the nearest 0.02 mm.