answersLogoWhite

0

Length X width X Depth (measured in feet) that gives you the total CUBIC feet of concrete you need. BUT Concrete is delivered by the CUBIC YARD so divide your answer by 27 to convert to cubic yards....There ya go

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What are the ingredients of plain cement concrete?

Aggregate, Ordinary Portland Cement, sand, water


What is PCC and RCC?

RCC is Reinforced Cement Concrete. PCC is Plain Cement Concrete. The main difference is that PCC has no reinforcement in it.


What is mean by pcc in civil engineering?

PCC in construction refers to Plain Cement Concrete, which is used as a preparatory base for laying RCC footing. Though PCC is also concrete, this is lean in nature, the ratio being 1:4:8. The compressive strength achieved with this mix is normally 7.5kN/sq.mm.


What is suitable for reinforced cement concrete slab ordinary portland cement or Portland Pozzolana Cement?

Ordinary Portland cement is suitable. As per IRC 21, Portland Pozzolana Cement is limited for Plain Concrete only.


What are the components of concrete?

cement fine aggregates and course aggregates and water for the hydration of cement are the main component of plain cement concrete. and for RCC M-S bars are used with these component.


How much sand and aggregate required 1 cubic meter of plain concrete cement?

For plain cement concrete, the aggregate used is of size 20 mm. For RCC structures, it is 40mm and for roads, it is 80mm


What is dry lean concrete?

A plain concrete with a large ratio aggregate to cement than structural concrete. It is used for filling and not structural duties


What is ratio of plain cement concrete 1 is-to 2 is-to 4 in plum concrete for road works?

1:2:4


Difference between rcc and pcc?

PCC is plain cement concrete. It consists of cement, sand, aggregates and water. It is good at resisting compression. RCC is reinforced cement concrete. It consists of cement, steel, aggregate and water. It is good at resisting tensile stresses also.


What is the Difference between IPS and Plain Concrete Cement Flooring?

how is conventional brick bat coba work done


Method of laying cement concrete road?

6'' thick sand filling, then 9'' thick plain cement concrete 1:4:8 [ ratio] then top layer of Plain cement concrete 1:1.5:3 mixed with concrete mixer. proper vibrator should be used. expansion joint should be after 2.5mts to 3mts alternatively of 12 mm wide and filled with the mixer of hot bitumen sand mixed. by: m.s.chaudhary [civil engineer]


What is reinforced concrete?

Reinforced concrete is concrete reinforced with steel bars because although concrete is very strong in compression (depending on its components) it is very weak in tension and the steel bars make up for the required tensile strength.