You would have to contact the manufacturer to be positive, but most builders assume volumetric dimensions. Therefore, the inside dimensions of the box probably total up to 248.891 cubic feet, or perhaps slightly over that.
To convert hundredweight (cwt) to bushels, you need to know the specific commodity's weight per bushel, as this can vary. For example, one bushel of corn weighs about 56 pounds, while one bushel of wheat weighs approximately 60 pounds. First, convert cwt to pounds by multiplying by 100, then divide by the weight of the commodity per bushel. For example, for corn: (cwt × 100) ÷ 56 = bushels.
A bushel is a measure of volume not weight. If the question was "how many pounds of water in 1.9 bushel" then it could be answered: 1 bushel = 8 Imperial gallons = 80 pounds water so 1.9 bushels = 80 * 1.9 = 152 pounds water
To convert bushels to tons, you need to know the specific crop's weight per bushel. For example, if you’re converting corn, 1 bushel weighs approximately 56 pounds. Therefore, 1000 bushels of corn would weigh about 28,000 pounds, which is equivalent to 14 tons (since there are 2,000 pounds in a ton). Different crops have different weights per bushel, so the conversion may vary accordingly.
The weight of sweet corn can vary, but on average, one bushel of sweet corn weighs about 56 pounds. Therefore, 21 bushels would weigh approximately 1,176 pounds (21 bushels x 56 pounds per bushel). Keep in mind that actual weights may vary slightly depending on moisture content and specific variety.
Someone answered... 56 lbs per bushel of corn, so 2000 lbs (1 ton) = 35.71 bushels That may be correct for corn, but would be incorrect for lead, feathers, or water. A bushel is a measure of volume (how much space does something take up) and a ton is a measure of mass or weight. This means that there is no direct conversion between bushels and tons unless the density (amount of weight per unit volume) of the substance being measured is specified.
bushels
To convert hundredweight (cwt) to bushels, you need to know the specific commodity's weight per bushel, as this can vary. For example, one bushel of corn weighs about 56 pounds, while one bushel of wheat weighs approximately 60 pounds. First, convert cwt to pounds by multiplying by 100, then divide by the weight of the commodity per bushel. For example, for corn: (cwt × 100) ÷ 56 = bushels.
To find out the weight of the wheat without the tare, subtract the tare weight from the total weight: 3942 lbs - 1050 lbs = 2892 lbs of wheat. Then convert this weight to bushels using the conversion rate: 1 bushel = 60 lbs, so 2892 lbs / 60 lbs/bushel = 48.2 bushels. Finally, multiply the number of bushels by the price per bushel to get the total worth: 48.2 bushels * $0.50 = $24.10.
To convert Silage Tons to Bushels you divide the tons by .15. If you are converting Bushels to tons, you multiply the tons by .15.
Bushels are now most often used as units of mass or weight rather than of volume!!!! Wheat and Corn are measured by the Bushel! One Bushel of Wheat is equal to 27.21829069134458 Kilos! One Bushel of Corn is equal to 25.39998628400741 Kilos!
Ear corn is somewhat variable by its very nature, so the answer to this question can only be estimated. On average, shelled corn should weigh around 56 pounds US to the bushel. Ear corn is approximately one bushel = 0.8 bushel of shelled corn. Therefore, there should be around 45 bushels to the ton.The United States Department of Agriculture (USDA) states that a bushel of ear corn weighs 70 lbs/ bushel. 2000/70#=28.57 bushels of ear corn to the ton.Although the two answers seem to be contradictory, they're not. The first answer assumes that one places ear corn into a one bushel container ("one bushel" being a volumetric measurement) and then shells it out, therefore making less than one bushel of shelled out corn. The USDA assumes that the user wants one bushel of shelled out grain after shelling, and so they add in the weight of the cobs to the shelled grain. It just depends on how you go about it.
Answer ON PAPER: 1728 cubic inches in a cubic foot 7.48 gallons in a cubic foot. 7.9 ft3 in a 55-gallon drum One bushel is 1.24 approx cubic feet. 6.37 bushels per 55-gallon drum. 56 pounds is a bushel 356 lbs in a drum of corn. 5.6 drums in a ton of corn. 35.7 bushels of corn in a ton. IN REALITY: Grain elevators measure bushels by weight. Actual weight may vary -- Between 350 and 400 pounds can fit in a 55 gallon drum So 350/56 = 6.25 bushels by weight. or 400/56 = 7.14 bushels by weight
Assuming that the corn meets the normal acceptable test weight of 56 pounds per bushel, there are 1,785.7 bushels in 100,000 pounds of corn (maize).
A bushel is a measure of volume not weight. If the question was "how many pounds of water in 1.9 bushel" then it could be answered: 1 bushel = 8 Imperial gallons = 80 pounds water so 1.9 bushels = 80 * 1.9 = 152 pounds water
Assuming the barley meets minimum test weight standards, there are 41 and 2/3 bushels in a ton.
I'm not so sure. I hope you find it though.
A bushel is a measure of dry volume, that is the volume of a non-liquid substance. It is used particularly in relation to grain commodities (Oats, Barley, Wheat, etc). As the bushel is a specified volume and each grain has a certain density, the actual weight varies between the grains; however, the weight of a bushel of each grain has been standardised (and legislated) for use in the commodity markets, for example one bushel of: Barley - 48 lb, Wheat - 60 lb. But note, that different legislators can define different weights for the same commodity, eg in USA a bushel of Oats is 32 lb, but in Canada it is 34 lb.